EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Three-Dimensional Strong Force Chain Properties of Mineral Aggregate Mixtures Based on the Discrete Element Method

Yuan Gao, Guoqiang Liu, Nan Jiang

Buildings · 17.10.2024 · 14 (10) · 3289

DOI: 10.3390/buildings14103289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 17.10.2024. Verfasst von Yuan Gao und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Double Innovation Doctor of Jiangsu, the Graduate Innovation Program of China University of Mining and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The skeleton structure composed of mineral aggregates is the main body to bear and transfer external loading in asphalt mixtures. To investigate the loading transfer mechanism of the mineral aggregate skeleton, the uniaxial penetration test and Discrete Element Method (DEM) were conducted for the Mineral Aggregate Mixture (MAM) to analyze its mechanical behavior. The three-dimensional strong force chain (SFC) was identified and evaluated based on the proposed recognition criterion and evaluation indices. The results indicate that 4.75 mm should be the boundary to distinguish the coarse and fine aggregates. The skeleton composed of aggregates located on SFCs has better bearing and transferring loading capacity due to its SFC number, average length, and total length decreasing with an increase in the aggregate size. Compared to SMA-16 and OGFC-16, AC-16 exhibits a higher number and total length of its SFC, a smaller average length of its SFC, and a lower average strength of its SFC. Consequently, AC-16 has a lower bearing and transferring loading capacity than that of SMA-16 and OGFC-16. In addition, approximately 90% of SFCs can only transfer external loading downward through 3–5 aggregates. The average direction angle of the SFC formed by fine aggregates is significantly higher than those formed by coarse aggregates. This indicates that the load transfer range of MAM composed of fine aggregates is noticeably larger, leading to lower loading transfer efficiency.

Förderung

  • the National Natural Science Foundation of China
  • the Double Innovation Doctor of Jiangsu
  • the Graduate Innovation Program of China University of Mining and Technology
  • the Postgraduate Research and Practice Innovation Program of Jiangsu Province

Zitieren

APA

Gao, Y., Liu, G., & Jiang, N. (2024). Characterization of Three-Dimensional Strong Force Chain Properties of Mineral Aggregate Mixtures Based on the Discrete Element Method. Buildings, 14(10), 3289. https://doi.org/10.3390/buildings14103289

Vancouver

Gao Y, Liu G, Jiang N. Characterization of Three-Dimensional Strong Force Chain Properties of Mineral Aggregate Mixtures Based on the Discrete Element Method. Buildings. 2024;14(10):3289. doi:10.3390/buildings14103289

BibTeX
@article{Gao2024,
  author = {Gao, Yuan and Liu, Guoqiang and Jiang, Nan},
  title = {Characterization of Three-Dimensional Strong Force Chain Properties of Mineral Aggregate Mixtures Based on the Discrete Element Method},
  journal = {Buildings},
  year = {2024},
  volume = {14},
  number = {10},
  pages = {3289},
  doi = {10.3390/buildings14103289}
}
Kostenlos starten →