Statistical Evaluation and Reliability Analysis of Interface Shear Capacity in Ultra-High-Performance Concrete Members
Buildings · 25.09.2024 · 14 (10) · 3064
DOI: 10.3390/buildings14103064 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 25.09.2024. Verfasst von Bipul Poudel und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Alabama Department of Economic and Community Affairs through the ARDEF program.
Abstract (Originalsprache)
The use of UHPC as an overlay and repair material in the bridge industry has been increasing recently. Ensuring sufficient interface shear strength between the substrate and UHPC is necessary for adequate performance and the structural integrity of the composite section. Due to the lack of structural design code for UHPC members, designers often rely on experimental data developed by researchers or on existing conventional concrete design code to predict the interface shear capacity of sections containing UHPC. The various test methods currently used to quantify the interface shear strength oftentimes produce different results. The objectives of this paper are to create a database of the studies on the interface shear strength of UHPC members available in the literature and carry out a statistical assessment. Moreover, a reliability analysis is conducted on the collected experimental database, and the probability of failure is determined for UHPC–concrete, UHPC–UHPC, and monolithic UHPC interfaces. The paper also investigates the dependence of the reliability index on two different test methods used for interface shear capacity prediction. Additionally, a simpler interface shear capacity model with readily determined parameters is proposed for the monolithic UHPC interface, with a better reliability index compared to current design specification.
Förderung
- Alabama Department of Economic and Community Affairs through the ARDEF program
Zitieren
APA
Poudel, B., Kalmogo, P., & Aaleti, S. (2024). Statistical Evaluation and Reliability Analysis of Interface Shear Capacity in Ultra-High-Performance Concrete Members. Buildings, 14(10), 3064. https://doi.org/10.3390/buildings14103064
Vancouver
Poudel B, Kalmogo P, Aaleti S. Statistical Evaluation and Reliability Analysis of Interface Shear Capacity in Ultra-High-Performance Concrete Members. Buildings. 2024;14(10):3064. doi:10.3390/buildings14103064
BibTeX
@article{Poudel2024,
author = {Poudel, Bipul and Kalmogo, Philippe and Aaleti, Sriram},
title = {Statistical Evaluation and Reliability Analysis of Interface Shear Capacity in Ultra-High-Performance Concrete Members},
journal = {Buildings},
year = {2024},
volume = {14},
number = {10},
pages = {3064},
doi = {10.3390/buildings14103064}
}
EUVIMED