EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Shear Mechanism at Sand-Concrete Interface under the Influence of the Concave Groove Angle of the Contact Surface

Zhigang Meng, Yunsong Li, Huanhuan Li, Songlin Shen, Haijiang Zhang

Buildings · 17.05.2024 · 14 (5) · 1452

DOI: 10.3390/buildings14051452 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 17.05.2024. Verfasst von Zhigang Meng und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province, the Yongjiang Talent Project, the General Scientific Research Projects of Zhejiang Education Department.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A “random-type” sand–concrete interface shear test was developed based on the sand cone method, with a focus on the most commonly encountered triangular contact surface morphology. A “regular-type” triangular interface, matched in roughness to the “random-type”, was meticulously designed. This “regular-type” interface features five distinct triangular groove inclinations: 18°, 33°, 50°, 70°, and 90°. A series of sand–concrete interface direct shear tests were conducted under consistent compaction conditions to investigate the impact of varying compaction densities and triangular groove inclinations on the shear strength at the interface. Particle flow simulations were utilized to examine the morphology of the shear band and the characteristics of particle migration influenced by the triangular contact surface. This analysis is aimed at elucidating the influence of the inclination of the triangular groove on the shear failure mechanism at the sand–concrete interface. The findings indicate that: (1) The morphology of the interface significantly impacts the shear strength of the sand–concrete interface, while the shape of the stress-displacement curve experiences minimal alteration. (2) At smaller inclination angles, particle contact forces are arranged in a wave-like configuration around the sawtooth tip, resulting in a non-uniform stress distribution along the sawtooth slope. However, as the inclination angle grows, the stress concentration at the sawtooth tip diminishes, and the stress distribution across the sawtooth slope becomes more consistent. (3) Particle migration is significantly influenced by the sawtooth’s inclination angle. At lower angles, particles climb the structure’s tip through sliding and rolling. As the angle increases, particle motion shifts to shear, accompanied by a transition in friction from surface friction to internal shear friction. This leads to the formation of a wider shear band and an increase in shear strength.

Förderung

  • Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province
  • the Yongjiang Talent Project
  • the General Scientific Research Projects of Zhejiang Education Department

Zitieren

APA

Meng, Z., Li, Y., Li, H., Shen, S., & Zhang, H. (2024). Investigation of the Shear Mechanism at Sand-Concrete Interface under the Influence of the Concave Groove Angle of the Contact Surface. Buildings, 14(5), 1452. https://doi.org/10.3390/buildings14051452

Vancouver

Meng Z, Li Y, Li H, Shen S, Zhang H. Investigation of the Shear Mechanism at Sand-Concrete Interface under the Influence of the Concave Groove Angle of the Contact Surface. Buildings. 2024;14(5):1452. doi:10.3390/buildings14051452

BibTeX
@article{Meng2024,
  author = {Meng, Zhigang and Li, Yunsong and Li, Huanhuan and Shen, Songlin and Zhang, Haijiang},
  title = {Investigation of the Shear Mechanism at Sand-Concrete Interface under the Influence of the Concave Groove Angle of the Contact Surface},
  journal = {Buildings},
  year = {2024},
  volume = {14},
  number = {5},
  pages = {1452},
  doi = {10.3390/buildings14051452}
}
Kostenlos starten →