Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading
Buildings · 30.04.2024 · 14 (5) · 1264
DOI: 10.3390/buildings14051264 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 30.04.2024. Verfasst von Chaoyun Yu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Cultivation Project of Young Scientific and Technological Talents in Inner Mongolia Higher Education Institutions, Fundamental Scientific Research Funds for Colleges and Universities Directly.
Abstract (Originalsprache)
In order to investigate freeze–thawed red sandstone failure processes under cyclic loading and unloading conditions, real-time acoustic emission (AE) and scanning electron microscopy (SEM) techniques were used to reveal the fracture process of the saturated red sandstone after cyclic loading and unloading tests using uniaxial compression. The results show that the stress–strain curves of the freeze–thawed sandstones show signs of hysteresis and exhibit a two-stage evolution of “sparse → dense”. In the cyclic loading and unloading process, the modulus of elasticity in the loading process is always larger than that in the unloading process, while the Poisson’s ratio is the opposite, and the radial irreversible strain and cumulative irreversible strain are larger than those in the axial direction. As the number of freeze–thaw cycles increases, the rock specimens need more cycles of loading and unloading to make the crack volume compressive strain Δεcv+ reach the maximum value and tend to stabilize, while the crack volume extensional strain Δεcv− tends to decrease gradually. This study also shows that the growth phase of the cyclic loading and unloading process has more ringing counts and a shorter duration, while the slow degradation phase has more ringing counts with loading and less with unloading. In addition, the F-T cycle gradually changes the internal microcracks of the red sandstone from shear damage, which is dominated by shear cracks, to tensile damage, which is dominated by tensile cracks. This study’s findings contribute to our knowledge of the mechanical characteristics and sandstone’s degradation process following F-T treatment, and also serve as a guide for engineering stability analyses conducted in the presence of multiphysical field coupling.
Förderung
- National Natural Science Foundation of China
- Cultivation Project of Young Scientific and Technological Talents in Inner Mongolia Higher Education Institutions
- Fundamental Scientific Research Funds for Colleges and Universities Directly
Zitieren
APA
Yu, C., Huang, S., Li, J., Wu, X., Tian, Y., & Bao, X. (2024). Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading. Buildings, 14(5), 1264. https://doi.org/10.3390/buildings14051264
Vancouver
Yu C, Huang S, Li J, Wu X, Tian Y, Bao X. Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading. Buildings. 2024;14(5):1264. doi:10.3390/buildings14051264
BibTeX
@article{Yu2024,
author = {Yu, Chaoyun and Huang, Shenghui and Li, Junkun and Wu, Xiangye and Tian, Yuhang and Bao, Xiankai},
title = {Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading},
journal = {Buildings},
year = {2024},
volume = {14},
number = {5},
pages = {1264},
doi = {10.3390/buildings14051264}
}
EUVIMED