Research on the System Design and Target Recognition Method of the Rebar-Tying Robot
Buildings · 20.03.2024 · 14 (3) · 838
DOI: 10.3390/buildings14030838 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 20.03.2024. Verfasst von Ruocheng Feng und 3 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Science and Technology Research and Development Program of China Railway Corporation Limited.
Abstract (Originalsprache)
In the construction industry, the construction process of rebar tying is highly dependent on manual operation, which leads to a wide range of work areas, high labor intensity, and limited efficiency. Therefore, robot technology for automatic rebar tying has become an inevitable trend in on-site construction. This study aims to develop a planar rebar-tying robot that can achieve autonomous navigation, precise positioning, and efficient tying on a plane rebar mesh without boundaries. Our research covers the overall design of the robot control systems, the selection of key hardware, the development of software platforms, and the optimization of core algorithms. Specifically, to address the technical challenges of accurately recognizing the tying position and status, we propose an innovative two-stage identification method that combines a depth camera and an industrial camera to obtain image information about the area to be tied. The effectiveness of the planar rebar-tying robot system, including the recognition method proposed in this study, was verified by experiments on a rebar mesh demonstration platform. The following application of our robot system in the field of the Shenyang Hunnan Science and Technology City Phase IV project achieved satisfactory performance. It is shown that this research has made a unique and significant innovation in the field of automatic rebar tying.
Förderung
- National Key R&D Program of China
- Science and Technology Research and Development Program of China Railway Corporation Limited
Zitieren
APA
Feng, R., Jia, Y., Wang, T., & Gan, H. (2024). Research on the System Design and Target Recognition Method of the Rebar-Tying Robot. Buildings, 14(3), 838. https://doi.org/10.3390/buildings14030838
Vancouver
Feng R, Jia Y, Wang T, Gan H. Research on the System Design and Target Recognition Method of the Rebar-Tying Robot. Buildings. 2024;14(3):838. doi:10.3390/buildings14030838
BibTeX
@article{Feng2024,
author = {Feng, Ruocheng and Jia, Youquan and Wang, Ting and Gan, Hongxiao},
title = {Research on the System Design and Target Recognition Method of the Rebar-Tying Robot},
journal = {Buildings},
year = {2024},
volume = {14},
number = {3},
pages = {838},
doi = {10.3390/buildings14030838}
}
EUVIMED