EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches

Ekkachai Yooprasertchai, Alireza Bahrami, Panumas Saingam, Qudeer Hussain, Ali Ejaz, Panuwat Joyklad

Buildings · 10.11.2023 · 13 (11) · 2820

DOI: 10.3390/buildings13112820 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 10.11.2023. Verfasst von Ekkachai Yooprasertchai und 5 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Civil Engineering, King Mongkut’s University of Technology Thonburi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Each year, an enormous amount of construction waste is produced worldwide. The reuse of construction waste in construction works is a sustainable solution. The present research work utilized recycled brick aggregates in the production of concrete. The resulting concrete exhibited substandard splitting tensile, flexural, and compressive properties. Steel fibers were used to improve these substandard properties of recycled brick aggregate concrete. The volume fractions of 1%, 2%, and 3% for steel fibers were mixed in concrete, whereas recycled brick aggregates were obtained from solid fired-clay bricks, hollow fired-clay bricks, and cement–clay interlocking bricks. The compressive strength was enhanced by up to 35.53% and 66.67% for natural and recycled brick aggregate concrete, respectively. Strengthened flexural specimens demonstrated up to 8765.69% increase in the energy dissipation. Specimens strengthened with steel fibers showed substantially improved splitting tensile, flexural, and compressive responses. Separate equations were proposed to predict the peak compressive strength, strain at peak compressive strength, elastic modulus, and post-peak modulus of recycled brick aggregate concrete. The proposed regression equations were utilized in combination with an existing compressive stress–strain model. A close agreement was observed between experimental and predicted compressive stress–strain curves of recycled brick aggregate concrete.

Förderung

  • Department of Civil Engineering, King Mongkut’s University of Technology Thonburi

Zitieren

APA

Yooprasertchai, E., Bahrami, A., Saingam, P., Hussain, Q., Ejaz, A., & Joyklad, P. (2023). Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches. Buildings, 13(11), 2820. https://doi.org/10.3390/buildings13112820

Vancouver

Yooprasertchai E, Bahrami A, Saingam P, Hussain Q, Ejaz A, Joyklad P. Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches. Buildings. 2023;13(11):2820. doi:10.3390/buildings13112820

BibTeX
@article{Yooprasertchai2023,
  author = {Yooprasertchai, Ekkachai and Bahrami, Alireza and Saingam, Panumas and Hussain, Qudeer and Ejaz, Ali and Joyklad, Panuwat},
  title = {Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches},
  journal = {Buildings},
  year = {2023},
  volume = {13},
  number = {11},
  pages = {2820},
  doi = {10.3390/buildings13112820}
}
Kostenlos starten →