EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Different Shear Directions on the Shear Resistance Characteristics of Rock Joints

Xipeng Lai, Wei Yuan, Wei Wang, Ruifeng Sun, Pengzhao Du, Hang Lin, Xiaodong Fu, Qinghe Niu, Chao Yin

Buildings · 10.10.2023 · 13 (10) · 2556

DOI: 10.3390/buildings13102556 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 10.10.2023. Verfasst von Xipeng Lai und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Hebei Province, Natural Science Foundation of Hebei Province, China, Natural Science Foundation of Hunan Province, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The joint roughness coefficient JRC of rock joints is an important parameter for measuring the geometric morphology of rock joints. However, the parameter obtained from traditional calculation methods has certain limitations in reflecting the differences in shear strength of rock joints in different shear directions with the same orientation. Firstly, native joint surface test blocks were cast using three-dimensional reverse reconstruction technology. Subsequently, direct shear tests were conducted under different normal stress and shear direction conditions, followed by numerical simulations using the finite difference software Flac3d. The JRC coefficient calculation method proposed by Yuan was modified and extended by considering the percentage of climbing sections and the effective contact area during the ramping process. This study indicates that the numerical simulation results are in good agreement with the shear test results. The introduction of the shear climbing rate SCR and the curvature coefficient of profile CCP is used to reflect the geometric differences of the joint surfaces in different shear directions. These two parameters are nonlinearly fitted with the experimental results, leading to a calculation formula that characterizes the shear strength characteristics of the joint surfaces in different shear directions. This novel formula is an extension of the JRC–JCS model.

Förderung

  • Key Research and Development Program of Hebei Province
  • Natural Science Foundation of Hebei Province, China
  • Natural Science Foundation of Hunan Province, China
  • Hebei Natural Science Foundation

Zitieren

APA

Lai, X., Yuan, W., Wang, W., Sun, R., Du, P., Lin, H., Fu, X., Niu, Q., & Yin, C. (2023). The Influence of Different Shear Directions on the Shear Resistance Characteristics of Rock Joints. Buildings, 13(10), 2556. https://doi.org/10.3390/buildings13102556

Vancouver

Lai X, Yuan W, Wang W, Sun R, Du P, Lin H, et al. The Influence of Different Shear Directions on the Shear Resistance Characteristics of Rock Joints. Buildings. 2023;13(10):2556. doi:10.3390/buildings13102556

BibTeX
@article{Lai2023,
  author = {Lai, Xipeng and Yuan, Wei and Wang, Wei and Sun, Ruifeng and Du, Pengzhao and Lin, Hang and Fu, Xiaodong and Niu, Qinghe and Yin, Chao},
  title = {The Influence of Different Shear Directions on the Shear Resistance Characteristics of Rock Joints},
  journal = {Buildings},
  year = {2023},
  volume = {13},
  number = {10},
  pages = {2556},
  doi = {10.3390/buildings13102556}
}
Kostenlos starten →