EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Ultimate Bearing Capacity of Pile Foundation Based on Two Optimization Algorithm Models

Jiajun Ren, Xianbin Sun

Buildings · 09.05.2023 · 13 (5) · 1242

DOI: 10.3390/buildings13051242 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 09.05.2023. Verfasst von Jiajun Ren und 1 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The determination of the bearing capacity of pile foundations is very important for their design. Due to the high uncertainty of various factors between the pile and the soil, many methods for predicting the ultimate bearing capacity of pile foundations focus on correlation with field tests. In recent years, artificial neural networks (ANN) have been successfully applied to various types of complex issues in geotechnical engineering, among which the back-propagation (BP) method is a relatively mature and widely used algorithm. However, it has inevitable shortcomings, resulting in large prediction errors and other issues. Based on this situation, this study was designed to accomplish two tasks: firstly, using the genetic algorithm (GA) and particle swarm optimization (PSO) to optimize the BP network. On this basis, the two optimization algorithms were improved to enhance the performance of the two optimization algorithms. Then, an adaptive genetic algorithm (AGA) and adaptive particle swarm optimization (APSO) were used to optimize a BP neural network to predict the ultimate bearing capacity of the pile foundation. Secondly, to test the performance of the two optimization models, the predicted results were compared and analyzed in relation to the traditional BP model and other network models of the same type in the literature based on the three most common statistical indicators. The models were evaluated using three common evaluation metrics, namely the coefficient of determination (R2), value account for (VAF), and the root mean square error (RMSE), and the evaluation metrics for the test set were obtained as AGA-BP (0.9772, 97.8348, 0.0436) and APSO-BP (0.9854, 98.4732, 0.0332). The results show that compared with the predicted results of the BP model and other models, the test set of the AGA-BP model and APSO-BP model achieved higher accuracy, and the APSO-BP model achieved higher accuracy and reliability, which provides a new method for the prediction of the ultimate bearing capacity of pile foundations.

Zitieren

APA

Ren, J., & Sun, X. (2023). Prediction of Ultimate Bearing Capacity of Pile Foundation Based on Two Optimization Algorithm Models. Buildings, 13(5), 1242. https://doi.org/10.3390/buildings13051242

Vancouver

Ren J, Sun X. Prediction of Ultimate Bearing Capacity of Pile Foundation Based on Two Optimization Algorithm Models. Buildings. 2023;13(5):1242. doi:10.3390/buildings13051242

BibTeX
@article{Ren2023,
  author = {Ren, Jiajun and Sun, Xianbin},
  title = {Prediction of Ultimate Bearing Capacity of Pile Foundation Based on Two Optimization Algorithm Models},
  journal = {Buildings},
  year = {2023},
  volume = {13},
  number = {5},
  pages = {1242},
  doi = {10.3390/buildings13051242}
}
Kostenlos starten →