EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Performance and Physico-Chemical Properties of Limestone Calcined Clay Cement (LC3) in Malawi

Innocent Kafodya, Debojyoti Basuroy, Joseph Mwiti Marangu, Grant Kululanga, Riccardo Maddalena, Viviana Iris Novelli

Buildings · 11.03.2023 · 13 (3) · 740

DOI: 10.3390/buildings13030740 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 11.03.2023. Verfasst von Innocent Kafodya und 5 weiteren Autor:innen. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HEFCW-GCRF via Cardiff University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Malawi is one of the least-developed countries in Sub-Saharan Africa with disaster-prone housing infrastructure characterized by poor construction materials. Therefore, there is a need to provide resilient and cost-effective materials, such as limestone calcined clay cement (LC3). However, the exploitation of LC3 in Malawi is limited due to a lack of mineralogical information about the clays and limestone and related strength and durability when used as a cementitious material. In this study, the strength and physico-chemical properties of LC3 systems with 50% and 40% clinker contents (LC3-50 and LC3-40) were investigated. Cement mortar specimens were prepared at water to cement (w/c) ratios of 0.45, 0.5, and 0.6 with varying calcined clay (CC) to limestone (CC/LS) ratios (1:1, 2:1, and 3:1). The effects of CC/LS ratio on the fresh properties, strength, and durability were investigated. The results showed that specimens with 40% Portland cement replacement levels (LC3-40) exhibited higher standard consistency (up to 45%) than LC3-50, porosity in the range of 8.3–13.3%, and maximum water uptake in the range of 3.8–10.9%. On the other hand, LC3-50 samples offered the highest strength of approximately 40 MPa, complying with requirements for pozzolanic cementitious materials, whereas LC3-40 conforms to the strength requirements for masonry cements. This work shows that LC3 systems can be manufactured with local clays and limestone available in Malawi, and used as a sustainable construction material to mitigate carbon emissions as well as boost the local economy.

Förderung

  • HEFCW-GCRF via Cardiff University

Zitieren

APA

Kafodya, I., Basuroy, D., Marangu, J. M., Kululanga, G., Maddalena, R., & Novelli, V. I. (2023). Mechanical Performance and Physico-Chemical Properties of Limestone Calcined Clay Cement (LC3) in Malawi. Buildings, 13(3), 740. https://doi.org/10.3390/buildings13030740

Vancouver

Kafodya I, Basuroy D, Marangu JM, Kululanga G, Maddalena R, Novelli VI. Mechanical Performance and Physico-Chemical Properties of Limestone Calcined Clay Cement (LC3) in Malawi. Buildings. 2023;13(3):740. doi:10.3390/buildings13030740

BibTeX
@article{Kafodya2023,
  author = {Kafodya, Innocent and Basuroy, Debojyoti and Marangu, Joseph Mwiti and Kululanga, Grant and Maddalena, Riccardo and Novelli, Viviana Iris},
  title = {Mechanical Performance and Physico-Chemical Properties of Limestone Calcined Clay Cement (LC3) in Malawi},
  journal = {Buildings},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {740},
  doi = {10.3390/buildings13030740}
}
Kostenlos starten →