In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar
Buildings · 15.02.2023 · 13 (2) · 538
DOI: 10.3390/buildings13020538 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 15.02.2023. Verfasst von Roneh Glenn D. Libre Jr. und 7 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology (DOST)—Engineering Research and Development for Technology (ERDT).
Abstract (Originalsprache)
Old structures that are made of adobe or brick walls are usually unreinforced and not designed for lateral forces. In-plane loads applied to unreinforced masonry walls (URM) are the usual cause of damage and failure of old buildings. In this research, small unreinforced brick masonry wallettes, 350 mm × 350 mm and 50 mm in thickness, are strengthened using bamboo fiber textile and plastered to the face of the walls using short bamboo fiber-reinforced geopolymer mortar. The wallettes are subjected to diagonal shear tests as described by ASTM E519 to investigate the in-plane shear performance of the strengthening method. The performances of 5 wallettes strengthened on one-side with mortar only, 5 wallettes on both-sides with mortar only, 5 wallettes with textile plastered on one-side only, and another 5 wallettes with textile plastered on both-sides, are compared to 5 control specimens without any strengthening. It is observed that the wallettes strengthened on one side and both sides with textile yield an increase in shear of about 24% and 35% in average, respectively. Failure modes show that the usual failure for URM is running bond failure and for strengthened URM is columnar failure. The implications of the results can be used in developing textile-reinforced geopolymer mortar systems to strengthen URM walls.
Förderung
- Department of Science and Technology (DOST)—Engineering Research and Development for Technology (ERDT)
Zitieren
APA
Jr., R. G. D. L., Jr., J. L. L., Lopez, L. F., Cacanando, C. J. D., Promentilla, M. A. B., Guades, E. J., Garciano, L. E. O., & Ongpeng, J. M. C. (2023). In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar. Buildings, 13(2), 538. https://doi.org/10.3390/buildings13020538
Vancouver
Jr. RGDL, Jr. JLL, Lopez LF, Cacanando CJD, Promentilla MAB, Guades EJ, et al. In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar. Buildings. 2023;13(2):538. doi:10.3390/buildings13020538
BibTeX
@article{Jr2023,
author = {Jr., Roneh Glenn D. Libre and Jr., Julius L. Leaño and Lopez, Luis Felipe and Cacanando, Carlo Joseph D. and Promentilla, Michael Angelo B. and Guades, Ernesto J. and Garciano, Lessandro Estelito O. and Ongpeng, Jason Maximino C.},
title = {In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar},
journal = {Buildings},
year = {2023},
volume = {13},
number = {2},
pages = {538},
doi = {10.3390/buildings13020538}
}
EUVIMED