EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue Behavior of M20 Torque Shear High-Strength Bolts under Constant-Amplitude Loading

Liang Zhang, Honggang Lei, Yu Shen, Shujia Zhang, Zichun Zhou

Buildings · 28.01.2023 · 13 (2) · 367

DOI: 10.3390/buildings13020367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 28.01.2023. Verfasst von Liang Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: LeiHonggang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Torque-shear high strength bolts were developed and widely used recently, and such high-tensile bolts may fracture in practical engineering due to the frequent complex loads, resulting in economic losses and even casualties. However, the fatigue performance of M20 torque shear high-strength bolts under constant-amplitude loading has not been investigated yet, and there are no specific design provisions for determining the constant-amplitude fatigue performance of such bolts. Hence, a total of 10 constant-amplitude fatigue tests were conducted using an MTS fatigue testing machine. For comparison, five different stress amplitudes were investigated. The fatigue performance, stress concentration and fracture analysis were analyzed. The scanning electron microscope images of fatigue failure were obtained to analyze the fatigue fracture characteristics of high-tensile bolts. A finite element model was established to analyze the stress distribution and the hot-spot stress of the bolts. The results suggested that the allowable nominal stress amplitude of M20 torque-shear type high-strength bolts was 96.371 MPa, while the allowable hot-spot stress amplitude was 283.296 MPa. Finally, the test results were compared against the existing design provisions. Upon comparison, the existing design formulas in GB 50017(2017), ANSI/AISC 360-16 (2010) and Eurocode 3 (2003) were found to be generally conservative. The S-N curve of torque-shear high strength bolts under constant-amplitude loading was proposed using the hot-spot stress amplitudes.

Förderung

  • LeiHonggang

Zitieren

APA

Zhang, L., Lei, H., Shen, Y., Zhang, S., & Zhou, Z. (2023). Fatigue Behavior of M20 Torque Shear High-Strength Bolts under Constant-Amplitude Loading. Buildings, 13(2), 367. https://doi.org/10.3390/buildings13020367

Vancouver

Zhang L, Lei H, Shen Y, Zhang S, Zhou Z. Fatigue Behavior of M20 Torque Shear High-Strength Bolts under Constant-Amplitude Loading. Buildings. 2023;13(2):367. doi:10.3390/buildings13020367

BibTeX
@article{Zhang2023,
  author = {Zhang, Liang and Lei, Honggang and Shen, Yu and Zhang, Shujia and Zhou, Zichun},
  title = {Fatigue Behavior of M20 Torque Shear High-Strength Bolts under Constant-Amplitude Loading},
  journal = {Buildings},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {367},
  doi = {10.3390/buildings13020367}
}
Kostenlos starten →