EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wearable Biomechanical Sensing Platform Integrated on Rigid–Flexible Coupled Load-Bearing Exoskeleton: Multi-Terrain Human–Machine Force Monitoring and Physiological Metabolic Validation

Yongtang Tian, Chunjie Chen, Wujing Cao, Xiaojun Wu, Xinyu Wu

Biosensors · 31.10.2026 · 16 (11) · 619

DOI: 10.3390/bios16110619 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, online erschienen am 31.10.2026. Verfasst von Yongtang Tian und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Program of Chinese Academy of Sciences, National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multi-terrain adaptability and metabolic reduction are critical for translating load-carrying lower-limb exoskeletons into practical use. However, conventional single-mode sensing cannot synchronously quantify human–exoskeleton interaction forces and physiological metabolic responses across complex terrains. To address this limitation, this study develops a rigid–flexible coupled load-carrying lower-limb exoskeleton and constructs a dual-modal test platform for interaction force and metabolic energy expenditure. Using DYMH-102 diaphragm box load cells and the Cosmed K5 portable gas metabolism analyzer, a standardized outdoor multi-scenario sensing protocol is established. This protocol quantifies exoskeleton assistance performance and human metabolic benefits under a 15 kg load over three representative terrains: hard level ground (HLG), gently uneven grassland (GUG), and gently sloped mountain road (GMR). The experimental results show that terrain complexity directly affects sensor measurement outcomes and exoskeleton assistance performance: under the three terrain conditions, the shoulder load transfer efficiencies of the exoskeleton are 55.97%, 54.76%, and 42.45%, respectively, and the peak impact load reduction rates reach 78.26%, 80.00%, and 66.67%. A descriptive gradual decline in metabolic saving was observed, likely attributable to terrain perturbations, gait distortion, and human–machine interface slippage, with metabolic cost reductions of 16.28%, 11.93%, and 11.48%. Unlike conventional exoskeleton evaluations relying on isolated performance metrics, this work integrates mechanical and physiological dual-modal sensing to create a synchronous quantitative assessment method for wearable devices in complex outdoor environments. The proposed method mitigates the poor terrain adaptability and lack of multi-parameter coupled evaluation that plague current wearable biosensing systems.

Förderung

  • Key Program of Chinese Academy of Sciences
  • National Natural Science Foundation of China
  • Guangdong Basic and Applied Basic Research Foundation
  • Guangdong S&T Program
  • Shenzhen Science and Technology Program
  • Science and Technology Innovation Program of Hunan Province

Zitieren

APA

Tian, Y., Chen, C., Cao, W., Wu, X., & Wu, X. (2026). Wearable Biomechanical Sensing Platform Integrated on Rigid–Flexible Coupled Load-Bearing Exoskeleton: Multi-Terrain Human–Machine Force Monitoring and Physiological Metabolic Validation. Biosensors, 16(11), 619. https://doi.org/10.3390/bios16110619

Vancouver

Tian Y, Chen C, Cao W, Wu X, Wu X. Wearable Biomechanical Sensing Platform Integrated on Rigid–Flexible Coupled Load-Bearing Exoskeleton: Multi-Terrain Human–Machine Force Monitoring and Physiological Metabolic Validation. Biosensors. 2026;16(11):619. doi:10.3390/bios16110619

BibTeX
@article{Tian2026,
  author = {Tian, Yongtang and Chen, Chunjie and Cao, Wujing and Wu, Xiaojun and Wu, Xinyu},
  title = {Wearable Biomechanical Sensing Platform Integrated on Rigid–Flexible Coupled Load-Bearing Exoskeleton: Multi-Terrain Human–Machine Force Monitoring and Physiological Metabolic Validation},
  journal = {Biosensors},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {619},
  doi = {10.3390/bios16110619}
}
Kostenlos starten →