EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multifunctional MXene/CNTs Composite Fibers with High Strength, Conductivity, and Bending Sensitivity Fabricated via Sodium Alginate-Assisted Wet Spinning

Ting Zheng, Shuting Xu, Zherui Zhang, Kaixuan Wang, Xiaodong Wang iD, Guoxing Sun

Biosensors · 2026

DOI: 10.3390/bios16100532 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2026. Verfasst von Ting Zheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Macau SAR 999078, Chi…. Hauptthemen laut MEDLINE: Nanotubes, Carbon, Alginates, Nanocomposites, Biosensing Techniques. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, Macau Young Scholars Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multicomponent nanocomposite fibers with synergistic properties are highly desirable for next-generation flexible electronics and sensors. In this study, MXene, carbon nanotubes (CNTs), and their composite fibers were successfully fabricated via a wet-spinning method using sodium alginate (SA) as a binder and fiber-forming agent. The morphology, mechanical properties, electrical conductivity, electrothermal behavior, and bending sensing performance of the resulting fibers were systematically investigated. All fibers exhibited longitudinal surface wrinkles and a nearly circular cross-section, indicating good process controllability. The MXene/CNTs@SA fibers, featuring a hierarchical synergistic network constructed from one-dimensional CNTs and two-dimensional MXene nanosheets, demonstrated significantly enhanced mechanical performance, with a tensile strength of 76.38 ± 7.09 MPa and conductivity of 16.14 ± 0.36 S·cm−1. Under a 12 V applied voltage, the MXene/CNTs@SA fibers achieved a saturation temperature of 52.77 °C and a power density of 2.95 kW·cm−3, demonstrating balanced electrothermal performance. Furthermore, the MXene/CNTs@SA fibers exhibited excellent flexibility and sensing stability, with resistance variations within ± 1.6% over repeated 100 bending–release cycles. The bending gauge factor was determined to be 7.36, confirming high sensitivity and cyclic durability. These results demonstrate that the wet-spun MXene/CNTs@SA composite fibers, with their robust mechanical strength, enhanced electrical conductivity, reliable electrothermal response, and superior bending sensitivity, hold great promise for applications in flexible electronic devices and wearable sensors.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Nanotubes, CarbonAlginatesNanocompositesBiosensing TechniquesElectric ConductivityTensile StrengthNitritesTransition Elements

Stichwörter der Autor:innen

MXenecarbon nanotubesmulticomponent composite fiberssodium alginatewet-spinning method

Substanzen

Nanotubes, CarbonAlginatesMXeneNitritesTransition Elements

Autor:innen und Institutionen

  • Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Macau SAR 999078, China.
  • Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China.

ORCID-Profile: Xiaodong Wang

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • Macau Young Scholars Program
  • National Key Laboratory of Ship Structural Safety

Zitieren

APA

Zheng, T., Xu, S., Zhang, Z., Wang, K., Wang, X., & Sun, G. (2026). Multifunctional MXene/CNTs Composite Fibers with High Strength, Conductivity, and Bending Sensitivity Fabricated via Sodium Alginate-Assisted Wet Spinning. Biosensors. https://doi.org/10.3390/bios16100532

Vancouver

Zheng T, Xu S, Zhang Z, Wang K, Wang X, Sun G. Multifunctional MXene/CNTs Composite Fibers with High Strength, Conductivity, and Bending Sensitivity Fabricated via Sodium Alginate-Assisted Wet Spinning. Biosensors. 2026. doi:10.3390/bios16100532

BibTeX
@article{Zheng2026,
  author = {Zheng, Ting and Xu, Shuting and Zhang, Zherui and Wang, Kaixuan and Wang, Xiaodong and Sun, Guoxing},
  title = {Multifunctional MXene/CNTs Composite Fibers with High Strength, Conductivity, and Bending Sensitivity Fabricated via Sodium Alginate-Assisted Wet Spinning},
  journal = {Biosensors},
  year = {2026},
  doi = {10.3390/bios16100532}
}
Kostenlos starten →