EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Label-Free Quantification of Bilirubin Using a Refractive Index-Insensitive Nanolaminate SERS Substrate

Jiwon Yun iD, Inyoung Kim, Wonil Nam

Biosensors · 14.05.2026 · 16 (5) · 282

DOI: 10.3390/bios16050282 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, online erschienen am 14.05.2026. Verfasst von Jiwon Yun und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Intelligent Robotics Engineering, Pukyong National University, Busan 48513, Republic of Korea. Hauptthemen laut MEDLINE: Spectrum Analysis, Raman, Bilirubin, Biosensing Techniques. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pukyong National University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bilirubin is an important biomarker, where a small unbound fraction dissociated from albumin can cross the blood–brain barrier and induce neurotoxicity, such as kernicterus, at low nanomolar levels. Accurate detection of this low-level fraction remains challenging. Surface-enhanced Raman spectroscopy (SERS) enables label-free molecular detection; however, variations in the local refractive index (RI) at plasmonic hotspots can detune the resonance from the excitation wavelength, leading to signal fluctuations and limited quantitative reliability. Here, we present a multi-resonant nanolaminate SERS substrate designed to achieve RI-insensitive and robust signal enhancement. The vertically stacked metal–insulator–metal architecture provides broadband spectral overlap with both excitation and Raman scattering under dielectric loading, maintaining consistent enhancement across varying RI conditions. We demonstrate label-free bilirubin detection with a highly linear response over 10−9 to 10−4 M, achieving an R2 value of 0.99. Compared with previously reported bilirubin SERS substrates relying mainly on single-resonant plasmonic enhancement, this RI-insensitive design offers improved quantitative reliability under dielectric environmental changes. These results highlight the importance of RI-insensitive SERS design for reliable quantification and provide a general strategy for robust SERS-based biosensing.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Spectrum Analysis, RamanBilirubinBiosensing TechniquesHumansRefractometryMetal Nanoparticles

Stichwörter der Autor:innen

bilirubin quantificationlabel-freerefractive index-insensitivesurface-enhanced Raman spectroscopy

Substanzen

Bilirubin

Autor:innen und Institutionen

  • Department of Intelligent Robotics Engineering, Pukyong National University, Busan 48513, Republic of Korea.
  • Department of Statistics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA.
  • Department of Electronic Engineering, Pukyong National University, Busan 48513, Republic of Korea.

ORCID-Profile: Jiwon Yun

Förderung

  • Pukyong National University

Zitieren

APA

Yun, J., Kim, I., & Nam, W. (2026). Label-Free Quantification of Bilirubin Using a Refractive Index-Insensitive Nanolaminate SERS Substrate. Biosensors, 16(5), 282. https://doi.org/10.3390/bios16050282

Vancouver

Yun J, Kim I, Nam W. Label-Free Quantification of Bilirubin Using a Refractive Index-Insensitive Nanolaminate SERS Substrate. Biosensors. 2026;16(5):282. doi:10.3390/bios16050282

BibTeX
@article{Yun2026,
  author = {Yun, Jiwon and Kim, Inyoung and Nam, Wonil},
  title = {Label-Free Quantification of Bilirubin Using a Refractive Index-Insensitive Nanolaminate SERS Substrate},
  journal = {Biosensors},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {282},
  doi = {10.3390/bios16050282}
}
Kostenlos starten →