EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancement of Piezoelectric Performance in PVDF via ZnO Doping and Its Application in Wearable Real-Time Monitoring of Human Radial Pulse

Hao Zhu, Xiang Guo, Qiang Liu, Qian Zhang iD

Biosensors · 24.03.2026 · 16 (4) · 187

DOI: 10.3390/bios16040187 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, online erschienen am 24.03.2026. Verfasst von Hao Zhu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuit Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China. Hauptthemen laut MEDLINE: Zinc Oxide, Wearable Electronic Devices, Polyvinyls, Biosensing Techniques. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Sichuan Province, National Natural Science Foundation of China, Natural Science Foundation of Sichuan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible piezoelectric materials demonstrate broad application potential in wearable health monitoring, human–machine interaction, and biosensing. However, the piezoelectric response of pure PVDF-TrFE is limited and insufficient to meet the requirements for highly sensitive sensing. In this study, ZnO/PVDF-TrFE composite films with varying ZnO doping contents (3–11 wt%) were fabricated and systematically characterized in terms of their structural, thermal, and electrical properties. The results indicate that ZnO significantly promotes the formation of the polar β-phase in PVDF-TrFE, with the maximum β-phase content (Fβ = 24.76%) and optimal piezoelectric performance achieved at 9 wt% ZnO doping. Devices based on this optimal composition exhibited stable ultrasonic transmission and reception capabilities under high-frequency pulse excitation, enabling sensitive detection of minor static pressure variations (e.g., contact pressure) through changes in ultrasonic echo signals, thereby realizing wearable conformity monitoring. Moreover, a sensor designed with a three-channel flexible substrate successfully captured human wrist pulse signals with high accuracy, demonstrating the practical utility and reliability of the device in flexible bio-electronic sensing applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Zinc OxideWearable Electronic DevicesPolyvinylsBiosensing TechniquesHumansFluorocarbon PolymersMonitoring, Physiologic

Stichwörter der Autor:innen

PVDF-TrFEZnOheart rate monitoringpiezoelectric

Substanzen

Zinc OxideFluorocarbon PolymersPolyvinylspolyvinylidene fluoride

Autor:innen und Institutionen

  • School of Integrated Circuit Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.
  • Mianyang Municipal Health Commission, Mianyang 621000, China.
  • School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China.

ORCID-Profile: Qian Zhang

Förderung

  • the Natural Science Foundation of Sichuan Province
  • National Natural Science Foundation of China
  • Natural Science Foundation of Sichuan Province

Zitieren

APA

Zhu, H., Guo, X., Liu, Q., & Zhang, Q. (2026). Enhancement of Piezoelectric Performance in PVDF via ZnO Doping and Its Application in Wearable Real-Time Monitoring of Human Radial Pulse. Biosensors, 16(4), 187. https://doi.org/10.3390/bios16040187

Vancouver

Zhu H, Guo X, Liu Q, Zhang Q. Enhancement of Piezoelectric Performance in PVDF via ZnO Doping and Its Application in Wearable Real-Time Monitoring of Human Radial Pulse. Biosensors. 2026;16(4):187. doi:10.3390/bios16040187

BibTeX
@article{Zhu2026,
  author = {Zhu, Hao and Guo, Xiang and Liu, Qiang and Zhang, Qian},
  title = {Enhancement of Piezoelectric Performance in PVDF via ZnO Doping and Its Application in Wearable Real-Time Monitoring of Human Radial Pulse},
  journal = {Biosensors},
  year = {2026},
  volume = {16},
  number = {4},
  pages = {187},
  doi = {10.3390/bios16040187}
}
Kostenlos starten →