Potentiodynamic Fabrication of Aromatic Diamine Linkers on Electrochemically Reduced Graphene Oxide Surface for Environmental Pollutant Nitrobenzene Monitoring
Biosensors · 01.01.2026 · 16 (1) · 33
DOI: 10.3390/bios16010033 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, online erschienen am 01.01.2026. Verfasst von Karmegam Muthukrishnan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Smart Energy Systems, Chennai Institute of Technology, Chennai 600069, India. Hauptthemen laut MEDLINE: Graphite, Nitrobenzenes, Environmental Pollutants, Biosensing Techniques. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Soonchunhyang University, Soonchunhyang University research fund.
Abstract (Originalsprache)
The structure of self-assembled monolayers (SAMs) greatly influences electrochemical interface behavior. This study systematically examines how positional isomers of aromatic diamines (ADMs) assemble on a glassy carbon (GC) electrode and how such ordering affects the attachment and performance of electrochemically reduced graphene oxide (ERGO). SAMs of ortho-, meta-, and para-phenylenediamine (o-PDA, m-PDA, and p-PDA) were fabricated on GC and characterized using atomic force microscopy (AFM) and Raman spectroscopy. Among them, GC/p-PDA exhibited the most compact and homogeneous interfacial structure. ERGO was subsequently immobilized through the free amine functionalities of the SAM, as confirmed by attenuated total reflectance–Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV). Strong covalent coupling and electrostatic interactions between the positively charged ERGO and terminal amines enabled stable attachment. Under optimized conditions, the modified GC/p-PDA/ERGO electrode demonstrated exceptional electrocatalytic activity toward nitrobenzene (NBz) reduction, achieving a high sensitivity of 1410 μA mM−1 cm−2 and a low detection limit of 0.040 μM. In addition, this sensor displayed outstanding anti-interference capability, stability, and recovery in a water sample. These results establish GC/p-PDA/ERGO sensor as a robust and efficient electrocatalytically active interface for nitroaromatic pollutants detection and sustainable environmental monitoring.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Centre for Smart Energy Systems, Chennai Institute of Technology, Chennai 600069, India.
- Department of Chemistry, The Gandhigram Rural Institute-Deemed to be University, Gandhigram 624302, India.
- Korea Native Animal Resources Utilization Convergence Research Institute, Soonchunhyang University, Asan 31538, Republic of Korea.
- Department of Chemistry, Soonchunhyang University, Asan 31538, Republic of Korea.
ORCID-Profile: Karmegam Muthukrishnan, Venkatachalam Vinothkumar, Mathur Gopalakrishnan Sethuraman, Tae Hyun Kim
Förderung
- Soonchunhyang University
- Soonchunhyang University research fund
Zitieren
APA
Muthukrishnan, K., Vinothkumar, V., Sethuraman, M. G., & Kim, T. H. (2026). Potentiodynamic Fabrication of Aromatic Diamine Linkers on Electrochemically Reduced Graphene Oxide Surface for Environmental Pollutant Nitrobenzene Monitoring. Biosensors, 16(1), 33. https://doi.org/10.3390/bios16010033
Vancouver
Muthukrishnan K, Vinothkumar V, Sethuraman MG, Kim TH. Potentiodynamic Fabrication of Aromatic Diamine Linkers on Electrochemically Reduced Graphene Oxide Surface for Environmental Pollutant Nitrobenzene Monitoring. Biosensors. 2026;16(1):33. doi:10.3390/bios16010033
BibTeX
@article{Muthukrishnan2026,
author = {Muthukrishnan, Karmegam and Vinothkumar, Venkatachalam and Sethuraman, Mathur Gopalakrishnan and Kim, Tae Hyun},
title = {Potentiodynamic Fabrication of Aromatic Diamine Linkers on Electrochemically Reduced Graphene Oxide Surface for Environmental Pollutant Nitrobenzene Monitoring},
journal = {Biosensors},
year = {2026},
volume = {16},
number = {1},
pages = {33},
doi = {10.3390/bios16010033}
}
EUVIMED