EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

3D Printing Assisted Wearable and Implantable Biosensors

Somnath Maji iD, Myounggyu Kwak, Reetesh Kumar iD, Hyungseok Lee

Biosensors · 17.09.2025 · 15 (9) · 619

DOI: 10.3390/bios15090619 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Biosensors, online erschienen am 17.09.2025. Verfasst von Somnath Maji und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Radiology, University of Michigan, Ann Arbor, MI 48109, USA. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Biosensing Techniques, Wearable Electronic Devices, Prostheses and Implants. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 266 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Health Industry Development Institute, National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biosensors have undergone transformative advancements, evolving into sophisticated wearable and implantable devices capable of real-time health monitoring. Traditional manufacturing methods, however, face limitations in scalability, cost, and design complexity, particularly for miniaturized, multifunctional biosensors. The integration of 3D printing technology addresses these challenges by enabling rapid prototyping, customization, and the production of intricate geometries with high precision. This review explores how additive manufacturing techniques facilitate the fabrication of flexible, stretchable, and biocompatible biosensors. By incorporating advanced materials like conductive polymers, nanocomposites, and hydrogels, 3D-printed biosensors achieve enhanced sensitivity, durability, and seamless integration with biological systems. Innovations such as biodegradable substrates and multi-material printing further expand applications in continuous glucose monitoring, neural interfaces, and point-of-care diagnostics. Despite challenges in material optimization and regulatory standardization, the convergence of 3D printing with nanotechnology and smart diagnostics heralds a new era of personalized, proactive healthcare, offering scalable solutions for both clinical and remote settings. This synthesis underscores the pivotal role of additive manufacturing in advancing wearable and implantable biosensor technology, paving the way for next-generation devices that prioritize patient-specific care and real-time health management.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalBiosensing TechniquesWearable Electronic DevicesProstheses and ImplantsHumans

Stichwörter der Autor:innen

3D printingadditive manufacturingbiocompatible materialsflexible electronicsimplantable biosensorswearable biosensors

Autor:innen und Institutionen

  • Department of Radiology, University of Michigan, Ann Arbor, MI 48109, USA.
  • Department of Smart Health Science and Technology, Kangwon National University (KNU), Chuncheon-si 24341, Republic of Korea.
  • Department of Bioengineering and Biotechnology, School of Basic and Applied Sciences, Galgotias University, Greater Noida 203201, India.
  • Department of Mechanical and Biomedical, Mechatronics Engineering, Kangwon National University (KNU), Chuncheon-si 24341, Republic of Korea.

ORCID-Profile: Somnath Maji, Reetesh Kumar

Förderung

  • National Research Foundation of Korea
  • Korea Health Industry Development Institute
  • National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT)
  • Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI)
  • Ministry of Health and Welfare, Republic of Korea

Zitieren

APA

Maji, S., Kwak, M., Kumar, R., & Lee, H. (2025). 3D Printing Assisted Wearable and Implantable Biosensors. Biosensors, 15(9), 619. https://doi.org/10.3390/bios15090619

Vancouver

Maji S, Kwak M, Kumar R, Lee H. 3D Printing Assisted Wearable and Implantable Biosensors. Biosensors. 2025;15(9):619. doi:10.3390/bios15090619

BibTeX
@article{Maji2025,
  author = {Maji, Somnath and Kwak, Myounggyu and Kumar, Reetesh and Lee, Hyungseok},
  title = {3D Printing Assisted Wearable and Implantable Biosensors},
  journal = {Biosensors},
  year = {2025},
  volume = {15},
  number = {9},
  pages = {619},
  doi = {10.3390/bios15090619}
}
Kostenlos starten →