EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Learning-Based Framework for Pre-Impact Same-Level Fall and Fall-from-Height Detection in Construction Sites Using a Single Wearable Inertial Measurement Unit

Oleksandr Yuhai iD, Yubin Cho, Joung Hwan Mun

Biosensors · 17.09.2025 · 15 (9) · 618

DOI: 10.3390/bios15090618 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, online erschienen am 17.09.2025. Verfasst von Oleksandr Yuhai und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Bio-Mechatronic Engineering, College of Biotechnology and Bioengineering, Sungkyunkwan University, Suwon 16419, Republic of Korea. Hauptthemen laut MEDLINE: Machine Learning, Accidental Falls, Wearable Electronic Devices. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Same-level-falls (SLFs) and falls-from-height (FFHs) remain major causes of severe injuries and fatalities on construction sites. Researchers are actively developing fall-prevention systems requiring accurate SLF and FFH detection in construction settings prone to false positives. In this study, a machine learning-based approach was established for accurate identification of SLF, FFH, and non-fall events using a single waist-mounted inertial measurement unit (IMU). A total of 48 participants executed 39 non-fall activities, 10 types of SLFs, and 8 types of FFHs, with a dummy used for falls exceeding 0.5 m. A two-stage feature extraction yielded 168 descriptors per data window, and an ensemble SHAP-PFI method selected the 153 most informative variables. The weighted XGBoost classifier, optimized via Bayesian techniques, outperformed other current boosting algorithms. Using 5-fold cross-validation, it achieved an average macro F1-score of 0.901 and macro Matthews correlation coefficient of 0.869, with a latency of 1.51 × 10−3 ms per window. Notably, the average lead times were 402 ms for SLFs and 640 ms for FFHs, surpassing the 130 ms inflation time required for wearable airbags. This pre-impact SLF and FFH detection approach delivers both rapid and precise detection, positioning it as a viable central component for wearable fall-prevention devices in fast-paced construction scenarios.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Machine LearningAccidental FallsWearable Electronic DevicesHumansMaleAdultAlgorithmsFemale

Stichwörter der Autor:innen

construction safetyensemble feature selectiongradient-boosted decision treespre-impact fall detectionwearable inertial measurement unit

Autor:innen und Institutionen

  • Department of Bio-Mechatronic Engineering, College of Biotechnology and Bioengineering, Sungkyunkwan University, Suwon 16419, Republic of Korea.

ORCID-Profile: Oleksandr Yuhai

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Yuhai, O., Cho, Y., & Mun, J. H. (2025). Machine Learning-Based Framework for Pre-Impact Same-Level Fall and Fall-from-Height Detection in Construction Sites Using a Single Wearable Inertial Measurement Unit. Biosensors, 15(9), 618. https://doi.org/10.3390/bios15090618

Vancouver

Yuhai O, Cho Y, Mun JH. Machine Learning-Based Framework for Pre-Impact Same-Level Fall and Fall-from-Height Detection in Construction Sites Using a Single Wearable Inertial Measurement Unit. Biosensors. 2025;15(9):618. doi:10.3390/bios15090618

BibTeX
@article{Yuhai2025,
  author = {Yuhai, Oleksandr and Cho, Yubin and Mun, Joung Hwan},
  title = {Machine Learning-Based Framework for Pre-Impact Same-Level Fall and Fall-from-Height Detection in Construction Sites Using a Single Wearable Inertial Measurement Unit},
  journal = {Biosensors},
  year = {2025},
  volume = {15},
  number = {9},
  pages = {618},
  doi = {10.3390/bios15090618}
}
Kostenlos starten →