EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of an MIP-Based Electrochemical Sensor for the Determination of Paracetamol in Pharmaceutical Samples

José Alberto Cabas Rodríguez, Fernando Javier Arévalo, Adrian Marcelo Granero

Biosensors · 2025

DOI: 10.3390/bios15080544 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2025. Verfasst von José Alberto Cabas Rodríguez und 2 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Química, Grupo GEANA, Instituto para el Desarrollo Agroindustrial y de la Salud (IDAS), Facultad de Ciencias Exactas, Fisicoquímicas …. Hauptthemen laut MEDLINE: Acetaminophen, Electrochemical Techniques, Biosensing Techniques, Molecularly Imprinted Polymers. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Consejo Nacional de Investigaciones Científicas y Técnicas.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Paracetamol (PAR) is a common antipyretic and analgesic extensively used to treat cold and flu symptoms. It has been proven to be effective in headaches and relieving fever and pain. It is usually found as an over-the-counter drug, which has been associated with an increase in cases of poisoning due to overdose. Therefore, the development of new analytical tools for the detection of PAR at low concentrations in different samples is necessary. In this work, a Molecularly Imprinted Polymer (MIP)-based electrochemical sensor was designed for the selective and sensitive determination of PAR using a glassy carbon electrode (GCE) modified with a polymeric film obtained through the electropolymerization of o-aminophenol. A complete characterization based on electrochemical techniques, such as electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), and scanning electron microscopy (SEM) was used to examine all steps involved in the construction of the MIP-based electrochemical sensor. In addition, all parameters affecting the MIP were optimized. As a result, the MIP-based electrochemical sensor showed a very low limit of detection (LOD) of 10 nM, with an analytical sensitivity of (3.4 ± 0.1) A M⁻¹. In addition, construction of the MIP-based electrochemical sensor showed highly reproducibility, expressed in terms of a variation coefficient lower than 4%. The MIP-based electrochemical sensor was successfully used in an assay for the determination of PAR in pharmaceutical products. The performance of the MIP-based electrochemical sensor was compared to High Performance Liquid Chromatography (HPLC) for the determination of PAR in pharmaceutical samples, showing excellent agreement between the two methodologies. A very important aspect of the developed sensor was its reusability for at least twenty times. The MIP-based electrochemical sensor is a reliable analytical tool for the determination of PAR.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AcetaminophenElectrochemical TechniquesBiosensing TechniquesMolecularly Imprinted PolymersMolecular ImprintingElectrodesLimit of DetectionReproducibility of ResultsDielectric SpectroscopyPharmaceutical Preparations

Stichwörter der Autor:innen

electrochemical sensormolecularly imprinted polymerparacetamolpharmaceutical samples

Substanzen

AcetaminophenMolecularly Imprinted PolymersPharmaceutical Preparations

Autor:innen und Institutionen

  • Departamento de Química, Grupo GEANA, Instituto para el Desarrollo Agroindustrial y de la Salud (IDAS), Facultad de Ciencias Exactas, Fisicoquímicas y Naturales, Universidad Nacional de Río Cuarto, Agencia Postal No 3,…

Förderung

  • Consejo Nacional de Investigaciones Científicas y Técnicas

Zitieren

APA

Rodríguez, J. A. C., Arévalo, F. J., & Granero, A. M. (2025). Design of an MIP-Based Electrochemical Sensor for the Determination of Paracetamol in Pharmaceutical Samples. Biosensors. https://doi.org/10.3390/bios15080544

Vancouver

Rodríguez JAC, Arévalo FJ, Granero AM. Design of an MIP-Based Electrochemical Sensor for the Determination of Paracetamol in Pharmaceutical Samples. Biosensors. 2025. doi:10.3390/bios15080544

BibTeX
@article{Rodrguez2025,
  author = {Rodríguez, José Alberto Cabas and Arévalo, Fernando Javier and Granero, Adrian Marcelo},
  title = {Design of an MIP-Based Electrochemical Sensor for the Determination of Paracetamol in Pharmaceutical Samples},
  journal = {Biosensors},
  year = {2025},
  doi = {10.3390/bios15080544}
}
Kostenlos starten →