EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polypyrrole-Modified Saccharomyces cerevisiae Used in Microbial Fuel Cell

Kasparas Kižys iD, Domas Pirštelis, Ingrida Bružaitė, Inga Morkvėnaitė

Biosensors · 2025

DOI: 10.3390/bios15080519 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2025. Verfasst von Kasparas Kižys und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Nanotechnology, State Research Institute Center for Physical Sciences and Technology, Sauletekio 3, LT-10257 Vilnius, Lithuania. Hauptthemen laut MEDLINE: Pyrroles, Saccharomyces cerevisiae, Polymers, Bioelectric Energy Sources. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lietuvos mokslo taryba, Research Council of Lithuania (LMTLT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microbial fuel cells (MFCs) are one of the contributors to the novel sustainable energy generation from organic waste. However, the application of MFCs is limited due to the slow charge transfer between cells and electrodes. This problem can be solved by modifying cells with conductive polymers, such as polypyrrole (PPy). We investigated the viability and electroactivity of modified cells at five different pyrrole concentrations, namely 8, 25, 50, 100, and 200 mM. The 100 mM concentration of PPy solution had the highest impact on yeast cells’ proliferation and growth, with the CFU/mL of PPy-treated yeast cells being 0.6 × 107 ± 5 × 10−2. The power density of the constructed MFC was evaluated by using an external load. The MFCs were analyzed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Although CV results with different pyrrole concentrations were similar, DPV indicated that yeast modification with 50 mM pyrrole resulted in the most significant current density, which may be attributed to an increase in charge transfer due to the conductive properties of polypyrrole. The power density achieved with modified yeast in wastewater, 12 mW/m2, reached levels similar to those in laboratory solutions, 45 mW/m2.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PyrrolesSaccharomyces cerevisiaePolymersBioelectric Energy SourcesElectrodes

Stichwörter der Autor:innen

9,10-phenanthrenequinoneSaccharomyces cerevisiaeelectrochemistrymicrobial fuel cellspolypyrrole

Substanzen

PyrrolespolypyrrolePolymers

Autor:innen und Institutionen

  • Department of Nanotechnology, State Research Institute Center for Physical Sciences and Technology, Sauletekio 3, LT-10257 Vilnius, Lithuania.

ORCID-Profile: Kasparas Kižys

Förderung

  • Lietuvos mokslo taryba
  • Research Council of Lithuania (LMTLT)

Zitieren

APA

Kižys, K., Pirštelis, D., Bružaitė, I., & Morkvėnaitė, I. (2025). Polypyrrole-Modified Saccharomyces cerevisiae Used in Microbial Fuel Cell. Biosensors. https://doi.org/10.3390/bios15080519

Vancouver

Kižys K, Pirštelis D, Bružaitė I, Morkvėnaitė I. Polypyrrole-Modified Saccharomyces cerevisiae Used in Microbial Fuel Cell. Biosensors. 2025. doi:10.3390/bios15080519

BibTeX
@article{Kiys2025,
  author = {Kižys, Kasparas and Pirštelis, Domas and Bružaitė, Ingrida and Morkvėnaitė, Inga},
  title = {Polypyrrole-Modified Saccharomyces cerevisiae Used in Microbial Fuel Cell},
  journal = {Biosensors},
  year = {2025},
  doi = {10.3390/bios15080519}
}
Kostenlos starten →