EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Progress in Electrode Materials for the Detection of Nitrofurazone and Nitrofurantoin

Mohammad Aslam iD, Saood Ali iD, Khursheed Ahmad iD, Danishuddin

Biosensors · 24.07.2025 · 15 (8) · 482

DOI: 10.3390/bios15080482 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Biosensors, online erschienen am 24.07.2025. Verfasst von Mohammad Aslam und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea. Hauptthemen laut MEDLINE: Nitrofurazone, Nitrofurantoin, Biosensing Techniques. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, it has been found that electrochemical sensing technology is one of the significant approaches for the monitoring of toxic and hazardous substances in food and the environment. Nitrofurazone (NFZ) and nitrofurantoin (NFT) possess a hazardous influence on the environment, aquatic life, and human health. Thus, various advanced materials such as graphene, carbon nanotubes, metal oxides, MXenes, layered double hydroxides (LDHs), polymers, metal–organic frameworks (MOFs), metal-based composites, etc. are widely used for the development of nitrofurazone and nitrofurantoin sensors. This review article summarizes the progress in the fabrication of electrode materials for nitrofurazone and nitrofurantoin sensing applications. The performance of the various electrode materials for nitrofurazone and nitrofurantoin monitoring are discussed. Various electrochemical sensing techniques such as square wave voltammetry (SWV), differential pulse voltammetry (DPV), linear sweep voltammetry (LSV), amperometry (AMP), cyclic voltammetry (CV), and chronoamperometry (CA) are discussed for the determination of NFZ and NFT. It is observed that DPV, SWV, and AMP/CA are more sensitive techniques compared to LSV and CV. The challenges, future perspectives, and limitations of NFZ and NFT sensors are also discussed. It is believed that present article may be useful for electrochemists as well materials scientists who are working to design electrode materials for electrochemical sensing applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NitrofurazoneNitrofurantoinBiosensing TechniquesElectrodesElectrochemical TechniquesHumansNanotubes, Carbon

Stichwörter der Autor:innen

electrochemical sensorselectrode materialsnitrofurantoinnitrofurazone

Substanzen

NitrofurazoneNitrofurantoinNanotubes, Carbon

Autor:innen und Institutionen

  • School of Chemical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.
  • School of Mechanical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.
  • Discipline of Chemistry, Indian Institute of Technology, Indore 453552, India.
  • Department of Biotechnology, Yeungnam University, Gyeongsan 38541, Republic of Korea.

ORCID-Profile: Mohammad Aslam, Saood Ali, Khursheed Ahmad

Zitieren

APA

Aslam, M., Ali, S., Ahmad, K., & Danishuddin (2025). Progress in Electrode Materials for the Detection of Nitrofurazone and Nitrofurantoin. Biosensors, 15(8), 482. https://doi.org/10.3390/bios15080482

Vancouver

Aslam M, Ali S, Ahmad K, Danishuddin. Progress in Electrode Materials for the Detection of Nitrofurazone and Nitrofurantoin. Biosensors. 2025;15(8):482. doi:10.3390/bios15080482

BibTeX
@article{Aslam2025,
  author = {Aslam, Mohammad and Ali, Saood and Ahmad, Khursheed and Danishuddin},
  title = {Progress in Electrode Materials for the Detection of Nitrofurazone and Nitrofurantoin},
  journal = {Biosensors},
  year = {2025},
  volume = {15},
  number = {8},
  pages = {482},
  doi = {10.3390/bios15080482}
}
Kostenlos starten →