EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Antifouling Modification of Gold Surfaces for Acoustic Wave Sensor Applications

Aries Delica iD, Mikhail A Nazarov iD, Brian De La Franier iD, Michael Thompson iD

Biosensors · 2025

DOI: 10.3390/bios15060343 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2025. Verfasst von Aries Delica und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, University of Toronto, 80 St. George Street, Toronto, ON M5S 3H6, Canada. Hauptthemen laut MEDLINE: Gold, Biofouling, Biosensing Techniques. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to develop a robust and reproducible method for fabricating efficient ultrathin antifouling coatings on gold surfaces by leveraging hydroxylation-based surface modifications. An ultrathin antifouling coating of a monoethylene glycol silane derivative, known to reduce fouling by at least 90% on flat hydroxylated surfaces, was successfully replicated on flat gold (reducing fouling by ~75%) by hydroxylating its surface with β-mercaptoethanol. This tandem coating contains the monoethylene glycol silane layer on top of the β-mercaptoethanol on the gold. Characterization was performed using contact angle goniometry, atomic force microscopy, x-ray photoelectron spectroscopy, and antifouling measurements. The results from these techniques, consistent with the literature, confirmed the successful and reproducible application of the tandem coating. Through heterogeneities, including defects and incomplete coverage, the AFM data revealed distinct visible layers of the tandem coating. The direct application of monoethylene glycol silane onto gold resulted in superior antifouling performance (88% reduction), demonstrating that direct silylation exploits pre-existing oxygen-containing species on the gold surface for a more effective antifouling layer. These findings offer a scalable approach for engineering antifouling coatings on gold substrates, with potential applications in biosensing and implantable device antifouling technologies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GoldBiofoulingBiosensing TechniquesSurface PropertiesSilanesMicroscopy, Atomic ForcePhotoelectron SpectroscopyPolyethylene Glycols

Stichwörter der Autor:innen

acoustic wave biosensorantifouling coatinggold-based biosensornon-specific adsorptionsurface-modified gold

Substanzen

GoldSilanesPolyethylene Glycols

Autor:innen und Institutionen

  • Department of Chemistry, University of Toronto, 80 St. George Street, Toronto, ON M5S 3H6, Canada.

ORCID-Profile: Aries Delica, Mikhail A Nazarov, Brian De La Franier, Michael Thompson

Zitieren

APA

Delica, A., Nazarov, M. A., De La Franier, B., & Thompson, M. (2025). Antifouling Modification of Gold Surfaces for Acoustic Wave Sensor Applications. Biosensors. https://doi.org/10.3390/bios15060343

Vancouver

Delica A, Nazarov MA, De La Franier B, Thompson M. Antifouling Modification of Gold Surfaces for Acoustic Wave Sensor Applications. Biosensors. 2025. doi:10.3390/bios15060343

BibTeX
@article{Delica2025,
  author = {Delica, Aries and Nazarov, Mikhail A and De La Franier, Brian and Thompson, Michael},
  title = {Antifouling Modification of Gold Surfaces for Acoustic Wave Sensor Applications},
  journal = {Biosensors},
  year = {2025},
  doi = {10.3390/bios15060343}
}
Kostenlos starten →