EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parallel Detection of the Unamplified Carbapenem Resistance Genes blaNDM-1 and blaOXA-1 Using a Plasmonic Nano-Biosensor with a Field-Portable DNA Extraction Method

Kaily Kao, Evangelyn C Alocilja

Biosensors · 14.02.2025 · 15 (2) · 112

DOI: 10.3390/bios15020112 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, online erschienen am 14.02.2025. Verfasst von Kaily Kao und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biosystems and Agricultural Engineering, Michigan State University, East Lansing, MI 48824, USA. Hauptthemen laut MEDLINE: beta-Lactamases, Biosensing Techniques, DNA, Bacterial. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Department of Agriculture, USDA Hatch, USDA-NIFA project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Antimicrobial resistance (AMR) is a rapidly growing global concern resulting from the overuse of antibiotics in agricultural and clinical settings. The challenge is exacerbated by the lack of rapid surveillance for resistant bacteria in clinical, environmental, and food supply settings. The increasing resistance to carbapenems, an important sub-class of beta-lactam antibiotics, is a major concern in the healthcare community. Carbapenem resistance (CR) has been found in the environment and food supply chain, where it has the potential to spread to pathogens, animals, and humans through direct or indirect contact. Rapid detection for preventative and control measures should be developed. This study utilized a gold nanoparticle-based plasmonic biosensor for the parallel detection of the CR genes blaNDM-1 and blaOXA-1. To explore the field portability, DNA was extracted using two methods: a commercial extraction kit and a boiling method. The results were compared between the two methods using a spectrophotometer and a cellphone application for RGB values to quantify the visual results. The results showed that the boiling method of extraction was more effective than extraction with a commercial kit for this analysis. The parallel detection of unamplified genes extracted via the boiling method is novel. When combined with other portable testing equipment, the approach has the potential to be an inexpensive, rapid, and simple on-site CR gene detection protocol.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

beta-LactamasesBiosensing TechniquesDNA, BacterialCarbapenemsMetal NanoparticlesGoldDrug Resistance, Bacterial

Stichwörter der Autor:innen

antimicrobial resistancebiosensorscarbapenem resistance genesdiagnosticsgenotypicnanoparticles

Substanzen

beta-LactamasesCarbapenemsbeta-lactamase NDM-1GoldDNA, Bacterial

Autor:innen und Institutionen

  • Department of Biosystems and Agricultural Engineering, Michigan State University, East Lansing, MI 48824, USA.
  • Global Alliance for Rapid Diagnostics (GARD), Michigan State University, East Lansing, MI 48824, USA.

Förderung

  • United States Department of Agriculture
  • USDA Hatch
  • USDA-NIFA project

Zitieren

APA

Kao, K., & Alocilja, E. C. (2025). Parallel Detection of the Unamplified Carbapenem Resistance Genes blaNDM-1 and blaOXA-1 Using a Plasmonic Nano-Biosensor with a Field-Portable DNA Extraction Method. Biosensors, 15(2), 112. https://doi.org/10.3390/bios15020112

Vancouver

Kao K, Alocilja EC. Parallel Detection of the Unamplified Carbapenem Resistance Genes blaNDM-1 and blaOXA-1 Using a Plasmonic Nano-Biosensor with a Field-Portable DNA Extraction Method. Biosensors. 2025;15(2):112. doi:10.3390/bios15020112

BibTeX
@article{Kao2025,
  author = {Kao, Kaily and Alocilja, Evangelyn C},
  title = {Parallel Detection of the Unamplified Carbapenem Resistance Genes blaNDM-1 and blaOXA-1 Using a Plasmonic Nano-Biosensor with a Field-Portable DNA Extraction Method},
  journal = {Biosensors},
  year = {2025},
  volume = {15},
  number = {2},
  pages = {112},
  doi = {10.3390/bios15020112}
}
Kostenlos starten →