EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enzyme Biosensor Based on 3D-Printed Flow-Through Reactor Modified with Thiacalixarene-Functionalized Oligo (Lactic Acids)

Dmitry Stoikov iD, Dominika Kappo iD, Alexey Ivanov iD, Vladimir Gorbachuk, Olga Mostovaya, Pavel Padnya iD, Ivan Stoikov iD, Gennady Evtugyn iD

Biosensors · 2025

DOI: 10.3390/bios15020077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2025. Verfasst von Dmitry Stoikov und 7 weiteren Autor:innen. Beteiligte Einrichtung: Alexander Butlerov Institute of Chemistry, Kazan Federal University, 18 Kremlevskaya Street, Kazan 420008, Russia. Hauptthemen laut MEDLINE: Biosensing Techniques, Printing, Three-Dimensional. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrochemical enzyme biosensors are extensively utilized in clinical analysis and environmental monitoring, yet achieving effective enzyme immobilization while maintaining high activity remains a challenge. In this work, we developed a flow-through enzyme biosensor system using a 3D-printed flow-through electrochemical cell fabricated from commercially available poly (lactic acid). After modification with thiacalixarene-functionalized oligo (lactic acids) (OLAs), the material enabled efficient immobilization of uricase on the inner surface of a replaceable reactor of the cell. Swelling and hydrolytic stability of OLAs in cone, partial cone, and 1,3-alternate conformations were studied, with 1,3-alernate conformation demonstrating superior stability and enzyme immobilization performance. The use of OLAs enhanced immobilization efficiency by over 30% and protected the reactor from swelling, hydrolytic degradation, and enzyme loss. The biosensor was validated for amperometric uric acid determination, with a screen-printed carbon electrode modified with carbon black and Prussian Blue. This modification reduced the cathodic potential for uric acid detection to –0.05 V. The biosensor exhibited a linear detection range of 10 nM to 30 μM with a detection limit of 7 nM, and it performed effectively in artificial urine and synthetic blood plasma. The novel cell design, featuring easy assembly and low-cost replaceable parts, makes this biosensor a promising candidate for routine clinical analysis and other practical applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biosensing TechniquesPrinting, Three-DimensionalUric AcidEnzymes, ImmobilizedElectrodesHumansElectrochemical TechniquesUrate Oxidase

Stichwörter der Autor:innen

chronoamperometryelectrochemical biosensorflow-through analysisreplaceable reactorthiacalixarene-functionalized oligo (lactic acids)uricase

Substanzen

Uric AcidEnzymes, ImmobilizedUrate Oxidase

Autor:innen und Institutionen

  • Alexander Butlerov Institute of Chemistry, Kazan Federal University, 18 Kremlevskaya Street, Kazan 420008, Russia.
  • Analytical Chemistry Department, Chemical Technology Institute, Ural Federal University, 19 Mira Street, Ekaterinburg 620002, Russia.

ORCID-Profile: Dmitry Stoikov, Dominika Kappo, Alexey Ivanov, Pavel Padnya, Ivan Stoikov, Gennady Evtugyn

Förderung

  • Russian Science Foundation

Zitieren

APA

Stoikov, D., Kappo, D., Ivanov, A., Gorbachuk, V., Mostovaya, O., Padnya, P., Stoikov, I., & Evtugyn, G. (2025). Enzyme Biosensor Based on 3D-Printed Flow-Through Reactor Modified with Thiacalixarene-Functionalized Oligo (Lactic Acids). Biosensors. https://doi.org/10.3390/bios15020077

Vancouver

Stoikov D, Kappo D, Ivanov A, Gorbachuk V, Mostovaya O, Padnya P, et al. Enzyme Biosensor Based on 3D-Printed Flow-Through Reactor Modified with Thiacalixarene-Functionalized Oligo (Lactic Acids). Biosensors. 2025. doi:10.3390/bios15020077

BibTeX
@article{Stoikov2025,
  author = {Stoikov, Dmitry and Kappo, Dominika and Ivanov, Alexey and Gorbachuk, Vladimir and Mostovaya, Olga and Padnya, Pavel and Stoikov, Ivan and Evtugyn, Gennady},
  title = {Enzyme Biosensor Based on 3D-Printed Flow-Through Reactor Modified with Thiacalixarene-Functionalized Oligo (Lactic Acids)},
  journal = {Biosensors},
  year = {2025},
  doi = {10.3390/bios15020077}
}
Kostenlos starten →