EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Combined Dielectric-Optical Characterization of Single Cells Using Dielectrophoresis-Imaging Flow Cytometry

Behnam Arzhang iD, Justyna Lee, Emerich Kovacs iD, Michael Butler, Elham Salimi, Douglas J Thomson iD, Greg E Bridges iD

Biosensors · 2024

DOI: 10.3390/bios14120577 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2024. Verfasst von Behnam Arzhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB R3T 5V6, Canada. Hauptthemen laut MEDLINE: Flow Cytometry, Cricetulus, Electrophoresis. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, we present a microfluidic flow cytometer for simultaneous imaging and dielectric characterization of individual biological cells within a flow. Utilizing a combination of dielectrophoresis (DEP) and high-speed imaging, this system offers a dual-modality approach to analyze both cell morphology and dielectric properties, enhancing the ability to analyze, characterize, and discriminate cells in a heterogeneous population. A high-speed camera is used to capture images of and track multiple cells in real-time as they flow through a microfluidic channel. A wide channel is used, enabling analysis of many cells in parallel. A coplanar electrode array perpendicular to cell flow is incorporated at the bottom of the channel to perform dielectrophoresis-based dielectric characterization. A frequency-dependent voltage applied to the array produces a non-uniform electric field, translating cells to higher or lower velocity depending on their dielectric polarizability. In this paper, we demonstrate how cell size, obtained by optical imaging, and DEP response, obtained by particle tracking, can be used to discriminate viable and non-viable Chinese hamster ovary cells in a heterogeneous cell culture. Multiphysics electrostatic-fluid dynamics simulation is used to develop a relationship between cell incoming velocity, differential velocity, size, and the cell’s polarizability, which can subsequently be used to evaluate its physiological state. Measurement of a mixture of polystyrene microspheres is used to evaluate the accuracy of the cytometer.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Flow CytometryCricetulusElectrophoresisAnimalsCHO CellsSingle-Cell AnalysisMicrofluidic Analytical Techniques

Stichwörter der Autor:innen

Chinese hamster ovary (CHO)dielectric spectroscopydielectrophoresisflow cytometrymicrofluidicsmicroscopysingle cell analysis

Autor:innen und Institutionen

  • Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB R3T 5V6, Canada.
  • National Institute for Bioprocessing Research and Training, A94 X099 Dublin, Ireland.

ORCID-Profile: Behnam Arzhang, Emerich Kovacs, Douglas J Thomson, Greg E Bridges

Förderung

  • Natural Sciences and Engineering Research Council

Zitieren

APA

Arzhang, B., Lee, J., Kovacs, E., Butler, M., Salimi, E., Thomson, D. J., & Bridges, G. E. (2024). Combined Dielectric-Optical Characterization of Single Cells Using Dielectrophoresis-Imaging Flow Cytometry. Biosensors. https://doi.org/10.3390/bios14120577

Vancouver

Arzhang B, Lee J, Kovacs E, Butler M, Salimi E, Thomson DJ, et al. Combined Dielectric-Optical Characterization of Single Cells Using Dielectrophoresis-Imaging Flow Cytometry. Biosensors. 2024. doi:10.3390/bios14120577

BibTeX
@article{Arzhang2024,
  author = {Arzhang, Behnam and Lee, Justyna and Kovacs, Emerich and Butler, Michael and Salimi, Elham and Thomson, Douglas J and Bridges, Greg E},
  title = {Combined Dielectric-Optical Characterization of Single Cells Using Dielectrophoresis-Imaging Flow Cytometry},
  journal = {Biosensors},
  year = {2024},
  doi = {10.3390/bios14120577}
}
Kostenlos starten →