EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Transducer Elements Based on Different Material Configurations for Aptamer-Based Electrochemical Biosensors

Ivan Lopez Carrasco, Gianaurelio Cuniberti, Jörg Opitz iD, Natalia Beshchasna iD

Biosensors · 2024

DOI: 10.3390/bios14070341 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2024. Verfasst von Ivan Lopez Carrasco und 3 weiteren Autor:innen. Beteiligte Einrichtung: Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Maria-Reiche-Strasse 2, 01109 Dresden, Germany. Hauptthemen laut MEDLINE: Biosensing Techniques, Aptamers, Nucleotide, Electrochemical Techniques, Gold. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for Economic Affairs and Climate Action, Bundesministerium für Wirtschaft und Klimaschutz (BMWK).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The selection of an appropriate transducer is a key element in biosensor development. Currently, a wide variety of substrates and working electrode materials utilizing different fabrication techniques are used in the field of biosensors. In the frame of this study, the following three specific material configurations with gold-finish layers were investigated regarding their efficacy to be used as electrochemical (EC) biosensors: (I) a silicone-based sensor substrate with a layer configuration of 50 nm SiO/50 nm SiN/100 nm Au/30–50 nm WTi/140 nm SiO/bulk Si); (II) polyethylene naphthalate (PEN) with a gold inkjet-printed layer; and (III) polyethylene terephthalate (PET) with a screen-printed gold layer. Electrodes were characterized using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) to evaluate their performance as electrochemical transducers in an aptamer-based biosensor for the detection of cardiac troponin I using the redox molecule hexacyanoferrade/hexacyaniferrade (K3[Fe (CN)6]/K4[Fe (CN)6]. Baseline signals were obtained from clean electrodes after a specific cleaning procedure and after functionalization with the thiolate cardiac troponin I aptamers “Tro4” and “Tro6”. With the goal of improving the PEN-based and PET-based performance, sintered PEN-based samples and PET-based samples with a carbon or silver layer under the gold were studied. The effect of a high number of immobilized aptamers will be tested in further work using the PEN-based sample. In this study, the charge-transfer resistance (Rct), anodic peak height (Ipa), cathodic peak height (Ipc) and peak separation (∆E) were determined. The PEN-based electrodes demonstrated better biosensor properties such as lower initial Rct values, a greater change in Rct after the immobilization of the Tro4 aptamer on its surface, higher Ipc and Ipa values and lower ∆E, which correlated with a higher number of immobilized aptamers compared with the other two types of samples functionalized using the same procedure.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biosensing TechniquesAptamers, NucleotideElectrochemical TechniquesGoldElectrodesDielectric SpectroscopyTransducersTroponin I

Stichwörter der Autor:innen

CVEISaptamercardiac troponinelectrochemical biosensorgold electrodes

Substanzen

Aptamers, NucleotideGoldTroponin I

Autor:innen und Institutionen

  • Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Maria-Reiche-Strasse 2, 01109 Dresden, Germany.
  • Faculty of Mechanical Science and Engineering, Institute of Materials Science and Max Bergmann Center of Biomaterials, Technische Universität Dresden, 01062 Dresden, Germany.

ORCID-Profile: Jörg Opitz, Natalia Beshchasna

Förderung

  • Federal Ministry for Economic Affairs and Climate Action
  • Bundesministerium für Wirtschaft und Klimaschutz (BMWK)

Zitieren

APA

Lopez Carrasco, I., Cuniberti, G., Opitz, J., & Beshchasna, N. (2024). Evaluation of Transducer Elements Based on Different Material Configurations for Aptamer-Based Electrochemical Biosensors. Biosensors. https://doi.org/10.3390/bios14070341

Vancouver

Lopez Carrasco I, Cuniberti G, Opitz J, Beshchasna N. Evaluation of Transducer Elements Based on Different Material Configurations for Aptamer-Based Electrochemical Biosensors. Biosensors. 2024. doi:10.3390/bios14070341

BibTeX
@article{LopezCarrasco2024,
  author = {Lopez Carrasco, Ivan and Cuniberti, Gianaurelio and Opitz, Jörg and Beshchasna, Natalia},
  title = {Evaluation of Transducer Elements Based on Different Material Configurations for Aptamer-Based Electrochemical Biosensors},
  journal = {Biosensors},
  year = {2024},
  doi = {10.3390/bios14070341}
}
Kostenlos starten →