EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study on the Mechanism and Properties of a Self-Powered H2O2 Electrochemical Sensor Based on a Fuel Cell Configuration with FePc and Graphene Cathode Catalyst Materials

Yunong Zhang, Andreas Offenhäusser iD, Yulia Mourzina iD

Biosensors · 04.06.2024 · 14 (6) · 290

DOI: 10.3390/bios14060290 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, online erschienen am 04.06.2024. Verfasst von Yunong Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Biological Information Processing-Bioelectronics (IBI-3), Forschungszentrum Jülich, 52425 Jülich, Germany. Hauptthemen laut MEDLINE: Hydrogen Peroxide, Graphite, Electrodes, Biosensing Techniques. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the China Scholarship Council, Deutsche Forschungsgemeinschaft (DFG, German Research Foundation).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional electrochemical sensors use voltammetric and amperometric methods with external power supply and modulation systems, which hinder the flexibility and application of the sensors. To avoid the use of an external power system and to minimize the number of electrochemical cell components, a self-powered electrochemical sensor (SPES) for hydrogen peroxide was investigated here. Iron phthalocyanine, an enzyme mimetic material, and Ni were used as a cathode catalyst and an anode material, respectively. The properties of the iron phthalocyanine catalyst modified by graphene nanoplatelets (GNPs) were investigated. Open circuit potential tests demonstrated the feasibility of this system. The GNP-modulated interface helped to solve the problems of aggregation and poor conductivity of iron phthalocyanine and allowed for the achievement of the best analytical characteristics of the self-powered H2O2 sensor with a low detection limit of 0.6 µM and significantly higher sensitivity of 0.198 A/(M·cm2) due to the enhanced electrochemical properties. The SPES demonstrated the best performance at pH 3.0 compared to pH 7.4 and 12.0. The sensor characteristics under the control of external variable load resistances are discussed and the cell showed the highest power density of 65.9 μW/cm2 with a 20 kOhm resistor. The practical applicability of this method was verified by the determination of H2O2 in blood serum.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Hydrogen PeroxideGraphiteElectrodesBiosensing TechniquesElectrochemical TechniquesCatalysisIndolesLimit of DetectionFerrous CompoundsPlatinumNickel

Stichwörter der Autor:innen

H2O2 sensorbiomimeticsfuel cellgraphenemetal phthalocyanineself-powered electrochemical sensorserum analysisstandard addition method

Substanzen

Hydrogen PeroxideGraphiteiron phthalocyanineIndolesFerrous CompoundsPlatinumNickel

Autor:innen und Institutionen

  • Institute of Biological Information Processing-Bioelectronics (IBI-3), Forschungszentrum Jülich, 52425 Jülich, Germany.
  • RWTH Aachen University, 52062 Aachen, Germany

ORCID-Profile: Andreas Offenhäusser, Yulia Mourzina

Förderung

  • the China Scholarship Council
  • Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)

Zitieren

APA

Zhang, Y., Offenhäusser, A., & Mourzina, Y. (2024). A Study on the Mechanism and Properties of a Self-Powered H2O2 Electrochemical Sensor Based on a Fuel Cell Configuration with FePc and Graphene Cathode Catalyst Materials. Biosensors, 14(6), 290. https://doi.org/10.3390/bios14060290

Vancouver

Zhang Y, Offenhäusser A, Mourzina Y. A Study on the Mechanism and Properties of a Self-Powered H2O2 Electrochemical Sensor Based on a Fuel Cell Configuration with FePc and Graphene Cathode Catalyst Materials. Biosensors. 2024;14(6):290. doi:10.3390/bios14060290

BibTeX
@article{Zhang2024,
  author = {Zhang, Yunong and Offenhäusser, Andreas and Mourzina, Yulia},
  title = {A Study on the Mechanism and Properties of a Self-Powered H2O2 Electrochemical Sensor Based on a Fuel Cell Configuration with FePc and Graphene Cathode Catalyst Materials},
  journal = {Biosensors},
  year = {2024},
  volume = {14},
  number = {6},
  pages = {290},
  doi = {10.3390/bios14060290}
}
Kostenlos starten →