EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Soft-Template-Based Manufacturing of Gold Nanostructures for Energy and Sensing Applications

Tushar Kanti Maiti, Wanli Liu iD, Asghar Niyazi, Adam M Squires, Sujay Chattpoadhyay, Mirella Di Lorenzo

Biosensors · 2024

DOI: 10.3390/bios14060289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2024. Verfasst von Tushar Kanti Maiti und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering and Centre for Bioengineering and Biomedical Technologies (CBio), University of Bath, Claverton Down, Bath BA2 7AY…. Hauptthemen laut MEDLINE: Gold, Biosensing Techniques, Nanostructures, Bioelectric Energy Sources. Die Arbeit wurde bisher 6-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Commonwealth Split-site PhD Scholarship.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Implantable and wearable bioelectronic systems can enable tailored therapies for the effective management of long-term diseases, thus minimising the risk of associated complications. In this context, glucose fuel cells hold great promise as in- or on-body energy harvesters for ultra-low-power bioelectronics and as self-powered glucose sensors. We report here the generation of gold nanostructures through a gold electrodeposition method in a soft template for the abiotic electrocatalysis of glucose in glucose fuel cells. Two different types of soft template were used: a lipid cubic phase-based soft template composed of Phytantriol and Brij®-56, and an emulsion-based soft template composed of hexane and sodium dodecyl sulphate (SDS). The resulting gold structures were first characterised by SAXS, SEM and TEM to elucidate their structure, and then their electrocatalytic activity towards glucose was compared in both a three-electrode set-up and in a fuel cell set-up. The Phytantriol/Brij®-56 template led to a nanofeather-like Au structure, while the hexane/SDS template led to a nanocoral-like Au structure. These templated electrodes exhibited similar electrochemical active surface areas (0.446 cm2 with a roughness factor (RF) of 14.2 for Phytantriol/Brij®-56 templated nanostructures and 0.421 cm2 with an RF of 13.4 for hexane/SDS templated nanostructures), and a sensitivity towards glucose of over 7 μA mM−1 cm−2. When tested as the anode of an abiotic glucose fuel cell (in a phosphate-buffered solution with a glucose concentration of 6 mM), a maximum power density of 7 μW cm−2 was reached; however the current density in the case of the fuel cell with the Phytantriol/Brij®-56 templated anode was approximately two times higher, reaching the value of 70 μA cm−2. Overall, this study demonstrates two simple, cost-effective and efficient strategies to manipulate the morphology of gold nanostructures, and thus their catalytic property, paving the way for the successful manufacturing of functional abiotic glucose fuel cells.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GoldBiosensing TechniquesNanostructuresBioelectric Energy SourcesGlucoseElectrodesElectrochemical Techniques

Stichwörter der Autor:innen

glucose fuel cellnanostructured goldsoft-template metal electrodeposition

Substanzen

GoldGlucose

Autor:innen und Institutionen

  • Department of Chemical Engineering and Centre for Bioengineering and Biomedical Technologies (CBio), University of Bath, Claverton Down, Bath BA2 7AY, UK.
  • Department of Polymer and Process Engineering, IIT Roorkee, Saharanpur 47001, India.
  • Department of Chemistry, University of Bath, Claverton Down, Bath BA2 7AY, UK.

ORCID-Profile: Wanli Liu

Förderung

  • Commonwealth Split-site PhD Scholarship

Zitieren

APA

Kanti Maiti, T., Liu, W., Niyazi, A., Squires, A. M., Chattpoadhyay, S., & Di Lorenzo, M. (2024). Soft-Template-Based Manufacturing of Gold Nanostructures for Energy and Sensing Applications. Biosensors. https://doi.org/10.3390/bios14060289

Vancouver

Kanti Maiti T, Liu W, Niyazi A, Squires AM, Chattpoadhyay S, Di Lorenzo M. Soft-Template-Based Manufacturing of Gold Nanostructures for Energy and Sensing Applications. Biosensors. 2024. doi:10.3390/bios14060289

BibTeX
@article{KantiMaiti2024,
  author = {Kanti Maiti, Tushar and Liu, Wanli and Niyazi, Asghar and Squires, Adam M and Chattpoadhyay, Sujay and Di Lorenzo, Mirella},
  title = {Soft-Template-Based Manufacturing of Gold Nanostructures for Energy and Sensing Applications},
  journal = {Biosensors},
  year = {2024},
  doi = {10.3390/bios14060289}
}
Kostenlos starten →