EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Towards a Self-Powered Amperometric Glucose Biosensor Based on a Single-Enzyme Biofuel Cell

Asta Kausaite-Minkstimiene iD, Algimantas Kaminskas, Galina Gayda iD, Almira Ramanaviciene iD

Biosensors · 08.03.2024 · 14 (3) · 138

DOI: 10.3390/bios14030138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, online erschienen am 08.03.2024. Verfasst von Asta Kausaite-Minkstimiene und 3 weiteren Autor:innen. Beteiligte Einrichtung: NanoTechnas-Center of Nanotechnology and Materials Science, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Naugard…. Hauptthemen laut MEDLINE: Bioelectric Energy Sources, Metal Nanoparticles, Graphite, Biosensing Techniques. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes the study of an amperometric glucose biosensor based on an enzymatic biofuel cell consisting of a bioanode and a biocathode modified with the same enzyme—glucose oxidase (GOx). A graphite rod electrode (GRE) was electrochemically modified with a layer of Prussian blue (PB) nanoparticles embedded in a poly(pyrrole-2-carboxylic acid) (PPCA) shell, and an additional layer of PPCA and was used as the cathode. A GRE modified with a nanocomposite composed of poly(1,10-phenanthroline-5,6-dione) (PPD) and gold nanoparticles (AuNPs) entrapped in a PPCA shell was used as an anode. Both electrodes were modified with GOx by covalently bonding the enzyme to the carboxyl groups of PPCA. The developed biosensor exhibited a wide linear range of 0.15–124.00 mM with an R2 of 0.9998 and a sensitivity of 0.16 μA/mM. The limit of detection (LOD) and quantification (LOQ) were found to be 0.07 and 0.23 mM, respectively. The biosensor demonstrated exceptional selectivity to glucose and operational stability throughout 35 days, as well as good reproducibility, repeatability, and anti-interference ability towards common interfering substances. The studies on human serum demonstrate the ability of the newly designed biosensor to determine glucose in complex real samples at clinically relevant concentrations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bioelectric Energy SourcesMetal NanoparticlesGraphiteBiosensing TechniquesHumansGlucoseGoldReproducibility of ResultsEnzymes, ImmobilizedGlucose OxidaseElectrodes

Stichwörter der Autor:innen

Prussian blueglucose biosensorglucose oxidasegold nanoparticlespoly(1,10-phenanthroline-5,6-dione)self-powered biosensorsingle-enzyme biofuel cell

Substanzen

GlucoseGoldEnzymes, ImmobilizedGraphiteGlucose Oxidase

Autor:innen und Institutionen

  • NanoTechnas-Center of Nanotechnology and Materials Science, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Naugarduko St. 24, LT-03225 Vilnius, Lithuania.
  • Department of Analytical Biotechnology, Institute of Cell Biology National Academy of Sciences of Ukraine (ICB NASU), Dragomanov St. 14/16, 79005 Lviv, Ukraine.

ORCID-Profile: Asta Kausaite-Minkstimiene, Galina Gayda, Almira Ramanaviciene

Zitieren

APA

Kausaite-Minkstimiene, A., Kaminskas, A., Gayda, G., & Ramanaviciene, A. (2024). Towards a Self-Powered Amperometric Glucose Biosensor Based on a Single-Enzyme Biofuel Cell. Biosensors, 14(3), 138. https://doi.org/10.3390/bios14030138

Vancouver

Kausaite-Minkstimiene A, Kaminskas A, Gayda G, Ramanaviciene A. Towards a Self-Powered Amperometric Glucose Biosensor Based on a Single-Enzyme Biofuel Cell. Biosensors. 2024;14(3):138. doi:10.3390/bios14030138

BibTeX
@article{KausaiteMinkstimiene2024,
  author = {Kausaite-Minkstimiene, Asta and Kaminskas, Algimantas and Gayda, Galina and Ramanaviciene, Almira},
  title = {Towards a Self-Powered Amperometric Glucose Biosensor Based on a Single-Enzyme Biofuel Cell},
  journal = {Biosensors},
  year = {2024},
  volume = {14},
  number = {3},
  pages = {138},
  doi = {10.3390/bios14030138}
}
Kostenlos starten →