Ultrasensitive, Label-Free Voltammetric Detection of Dibutyl Phthalate Based on Poly-l-lysine/poly(3,4-ethylenedioxythiophene)-porous Graphene Nanocomposite and Molecularly Imprinted Polymers
Biosensors · 2024
DOI: 10.3390/bios14030121 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, 2024. Verfasst von Chuanxiang Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Packing and Materials Engineering, Hunan University of Technology, Zhuzhou 412007, China. Hauptthemen laut MEDLINE: Graphite, Nanocomposites, Molecular Imprinting, Phenylenediamines. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Project of Hunan Province Department of Education.
Abstract (Originalsprache)
Development of an efficient technique for accurate and sensitive dibutyl phthalate (DBP) determination is crucial for food safety and environment protection. An ultrasensitive molecularly imprinted polymers (MIP) voltammetric sensor was herein engineered for the specific determination of DBP using poly-l-lysine/poly(3,4-ethylenedioxythiophene)/porous graphene nanocomposite (PLL/PEDOT−PG) and poly(o-phenylenediamine)-imprinted film as a label-free and sensing platform. Fabrication of PEDOT−PG nanocomposites was achieved through a simple liquid–liquid interfacial polymerization. Subsequently, poly-l-lysine (PLL) functionalization was employed to enhance the dispersibility and stability of the prepared PEDOT−PG, as well as promote its adhesion on the sensor surface. In the presence of DBP, the imprinted poly(o-phenylenediamine) film was formed on the surface of PLL/PEDOT−PG. Investigation of the physical properties and electrochemical behavior of the MIP/PLL/PEDOT−PG indicates that the incorporation of PG into PEDOT, with PLL uniformly wrapping its surface, significantly enhanced conductivity, carrier mobility, stability, and provided a larger surface area for specific recognition sites. Under optimal experimental conditions, the electrochemical response exhibited a linear relationship with a logarithm of DBP concentration within the range of 1 fM to 5 µM, with the detection limit as low as 0.88 fM. The method demonstrated exceptional stability and repeatability and has been successfully applied to quantify DBP in plastic packaging materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Packing and Materials Engineering, Hunan University of Technology, Zhuzhou 412007, China.
- Hunan Key Laboratory of Biomedical Nanomaterials and Devices, College of Life Science and Chemistry, Hunan University of Technology, Zhuzhou 412007, China.
Förderung
- Scientific Research Project of Hunan Province Department of Education
Zitieren
APA
Zhang, C., Li, S., Tang, L., Li, S., Hu, C., Zhang, D., Chao, L., Liu, X., Tan, Y., & Deng, Y. (2024). Ultrasensitive, Label-Free Voltammetric Detection of Dibutyl Phthalate Based on Poly-l-lysine/poly(3,4-ethylenedioxythiophene)-porous Graphene Nanocomposite and Molecularly Imprinted Polymers. Biosensors. https://doi.org/10.3390/bios14030121
Vancouver
Zhang C, Li S, Tang L, Li S, Hu C, Zhang D, et al. Ultrasensitive, Label-Free Voltammetric Detection of Dibutyl Phthalate Based on Poly-l-lysine/poly(3,4-ethylenedioxythiophene)-porous Graphene Nanocomposite and Molecularly Imprinted Polymers. Biosensors. 2024. doi:10.3390/bios14030121
BibTeX
@article{Zhang2024,
author = {Zhang, Chuanxiang and Li, Song and Tang, Lingxiao and Li, Shuo and Hu, Changchun and Zhang, Dan and Chao, Long and Liu, Xueying and Tan, Yimin and Deng, Yan},
title = {Ultrasensitive, Label-Free Voltammetric Detection of Dibutyl Phthalate Based on Poly-l-lysine/poly(3,4-ethylenedioxythiophene)-porous Graphene Nanocomposite and Molecularly Imprinted Polymers},
journal = {Biosensors},
year = {2024},
doi = {10.3390/bios14030121}
}
EUVIMED