EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biofunctionalisation of Polypyrrole Nanowires Array with Sulfite Oxidase Coupled with the Integration of Platinum Nanoparticles for Ultrasensitive Amperometric Detection of Sulfite

Shahid Hussain, Samuel B Adeloju

Biosensors · 2023

DOI: 10.3390/bios13060621 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Shahid Hussain und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry, Monash University, Clayton, VIC 3800, Australia. Hauptthemen laut MEDLINE: Sulfite Oxidase, Metal Nanoparticles, Nanowires, Biosensing Techniques. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sulfite determination in foods and alcoholic beverages is a common requirement by food and drug administration organisations in most countries. In this study, the enzyme, sulfite oxidase (SOx), is used to biofunctionalise a platinum-nanoparticle-modified polypyrrole nanowire array (PPyNWA) for the ultrasensitive amperometric detection of sulfite. A dual-step anodisation method was used to prepare the anodic aluminum oxide membrane used as a template for the initial fabrication of the PPyNWA. PtNPs were subsequently deposited on the PPyNWA by potential cycling in a platinum solution. The resulting PPyNWA-PtNP electrode was then biofuntionalised by adsorption of SOx onto the surface. The confirmation of the adsorption of SOx and the presence of PtNPs in the PPyNWA-PtNPs-SOx biosensor was verified by scanning electron microscopy and electron dispersive X-ray spectroscopy. Cyclic voltammetry and amperometric measurements were used to investigate the properties of the nanobiosensor and to optimise its use for sulfite detection. Ultrasensitive detection of sulfite with the PPyNWA-PtNPs-SOx nanobiosensor was accomplished by use of 0.3 M pyrrole, 10 U mL−1 of SOx, adsorption time of 8 h, a polymerisation period of 900 s, and an applied current density of 0.7 mA cm−2. The response time of the nanobiosensor was 2 s, and its excellent analytical performance was substantiated with a sensitivity of 57.33 μA cm−2 mM−1, a limit of detection of 12.35 nM, and a linear response range from 0.12 to 1200 μM. Application of the nanobiosensor to sulfite determination in beer and wine samples was achieved with a recovery efficiency of 97–103%.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Sulfite OxidaseMetal NanoparticlesNanowiresBiosensing TechniquesPlatinumPolymersPyrrolesSulfitesEnzymes, ImmobilizedElectrodes

Stichwörter der Autor:innen

AAO templatePPy nanowiresPt nanoparticlesamperometric detectionsulfitesulfite oxidase

Substanzen

Sulfite OxidasePlatinumpolypyrrolePolymersPyrrolesSulfitesEnzymes, Immobilized

Autor:innen und Institutionen

  • School of Chemistry, Monash University, Clayton, VIC 3800, Australia.
  • Faculty of Science & Health, Charles Sturt University, Albury, NSW 2640, Australia.

Zitieren

APA

Hussain, S., & Adeloju, S. B. (2023). Biofunctionalisation of Polypyrrole Nanowires Array with Sulfite Oxidase Coupled with the Integration of Platinum Nanoparticles for Ultrasensitive Amperometric Detection of Sulfite. Biosensors. https://doi.org/10.3390/bios13060621

Vancouver

Hussain S, Adeloju SB. Biofunctionalisation of Polypyrrole Nanowires Array with Sulfite Oxidase Coupled with the Integration of Platinum Nanoparticles for Ultrasensitive Amperometric Detection of Sulfite. Biosensors. 2023. doi:10.3390/bios13060621

BibTeX
@article{Hussain2023,
  author = {Hussain, Shahid and Adeloju, Samuel B},
  title = {Biofunctionalisation of Polypyrrole Nanowires Array with Sulfite Oxidase Coupled with the Integration of Platinum Nanoparticles for Ultrasensitive Amperometric Detection of Sulfite},
  journal = {Biosensors},
  year = {2023},
  doi = {10.3390/bios13060621}
}
Kostenlos starten →