EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling of Paper-Based Bi-Material Cantilever Actuator for Microfluidic Biosensors

Ashutosh Kumar iD, Hojat Heidari-Bafroui iD, Nassim Rahmani, Constantine Anagnostopoulos, Mohammad Faghri

Biosensors · 2023

DOI: 10.3390/bios13060580 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Ashutosh Kumar und 4 weiteren Autor:innen. Beteiligte Einrichtung: Microfluidics Laboratory, Department of Mechanical, Industrial and Systems Engineering, University of Rhode Island, 2 East Alumni Avenue, Kingston, R…. Hauptthemen laut MEDLINE: Microfluidics, Biosensing Techniques. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research explores the dynamics of a fluidically loaded Bi-Material cantilever (B-MaC), a critical component of μPADs (microfluidic paper-based analytical devices) used in point-of-care diagnostics. Constructed from Scotch Tape and Whatman Grade 41 filter paper strips, the B-MaC’s behavior under fluid imbibition is examined. A capillary fluid flow model is formulated for the B-MaC, adhering to the Lucas–Washburn (LW) equation, and supported by empirical data. This paper further investigates the stress–strain relationship to estimate the modulus of the B-MaC at various saturation levels and to predict the behavior of the fluidically loaded cantilever. The study shows that the Young’s modulus of Whatman Grade 41 filter paper drastically decreases to approximately 20 MPa (about 7% of its dry-state value) upon full saturation. This significant decrease in flexural rigidity, in conjunction with the hygroexpansive strain and coefficient of hygroexpansion (empirically deduced to be 0.008), is essential in determining the B-MaC’s deflection. The proposed moderate deflection formulation effectively predicts the B-MaC’s behavior under fluidic loading, emphasizing the measurement of maximum (tip) deflection using interfacial boundary conditions for the B-MaC’s wet and dry regions. This knowledge of tip deflection will prove instrumental in optimizing the design parameters of B-MaCs.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MicrofluidicsBiosensing TechniquesSoftwareFiltrationLab-On-A-Chip Devices

Stichwörter der Autor:innen

Bi-Material cantileverWhatman Grade 41 filter paperfluid imbibitionhygroexpansion coefficienthygroexpansion strainmodulus of paperpaper-based sensorpaper-based valve

Autor:innen und Institutionen

  • Microfluidics Laboratory, Department of Mechanical, Industrial and Systems Engineering, University of Rhode Island, 2 East Alumni Avenue, Kingston, RI 02881, USA.

ORCID-Profile: Ashutosh Kumar, Hojat Heidari-Bafroui

Zitieren

APA

Kumar, A., Heidari-Bafroui, H., Rahmani, N., Anagnostopoulos, C., & Faghri, M. (2023). Modeling of Paper-Based Bi-Material Cantilever Actuator for Microfluidic Biosensors. Biosensors. https://doi.org/10.3390/bios13060580

Vancouver

Kumar A, Heidari-Bafroui H, Rahmani N, Anagnostopoulos C, Faghri M. Modeling of Paper-Based Bi-Material Cantilever Actuator for Microfluidic Biosensors. Biosensors. 2023. doi:10.3390/bios13060580

BibTeX
@article{Kumar2023,
  author = {Kumar, Ashutosh and Heidari-Bafroui, Hojat and Rahmani, Nassim and Anagnostopoulos, Constantine and Faghri, Mohammad},
  title = {Modeling of Paper-Based Bi-Material Cantilever Actuator for Microfluidic Biosensors},
  journal = {Biosensors},
  year = {2023},
  doi = {10.3390/bios13060580}
}
Kostenlos starten →