In-Situ Fabrication of Electroactive Cu2+-Trithiocyanate Complex and Its Application for Label-Free Electrochemical Aptasensing of Thrombin
Biosensors · 2023
DOI: 10.3390/bios13050532 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Zehao Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry, Chemical Engineering and Environment Science, Fujian Provincial Key Laboratory of Modern Analytical Science and Separation Tech…. Hauptthemen laut MEDLINE: Metal Nanoparticles, Aptamers, Nucleotide, Biosensing Techniques. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Fujian Province, Opening Fund of Provincial key Laboratory of Molecular-based Materials.
Abstract (Originalsprache)
The preparation of an electroactive matrix for the immobilization of the bioprobe shows great promise to construct the label-free biosensors. Herein, the electroactive metal-organic coordination polymer has been in-situ prepared by pre-assembly of a layer of trithiocynate (TCY) on a gold electrode (AuE) through Au-S bond, followed by repetitive soaking in Cu(NO3)2 solution and TCY solutions. Then the gold nanoparticles (AuNPs) and the thiolated thrombin aptamers were successively assembled on the electrode surface, and thus the electrochemical electroactive aptasensing layer for thrombin was achieved. The preparation process of the biosensor was characterized by an atomic force microscope (AFM), attenuated total reflection-Fourier transform infrared (ATR-FTIR), and electrochemical methods. Electrochemical sensing assays showed that the formation of the aptamer-thrombin complex changed the microenvironment and the electro-conductivity of the electrode interface, causing the electrochemical signal suppression of the TCY-Cu2+ polymer. Additionally, the target thrombin can be label-free analyzed. Under optimal conditions, the aptasensor can detect thrombin in the concentration range from 1.0 fM to 1.0 μM, with a detection limit of 0.26 fM. The spiked recovery assay showed that the recovery of the thrombin in human serum samples was 97.2–103%, showing that the biosensor is feasible for biomolecule analysis in a complex sample.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Chemistry, Chemical Engineering and Environment Science, Fujian Provincial Key Laboratory of Modern Analytical Science and Separation Technology, Minnan Normal University, Zhangzhou 363000, China.
- Anhui Laboratory of Molecule-Based Materials, Anhui Normal University, Wuhu 241000, China.
ORCID-Profile: Qingxiang Wang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Fujian Province
- Opening Fund of Provincial key Laboratory of Molecular-based Materials
Zitieren
APA
Wang, Z., Gao, N., Chen, Z., Gao, F., & Wang, Q. (2023). In-Situ Fabrication of Electroactive Cu2+-Trithiocyanate Complex and Its Application for Label-Free Electrochemical Aptasensing of Thrombin. Biosensors. https://doi.org/10.3390/bios13050532
Vancouver
Wang Z, Gao N, Chen Z, Gao F, Wang Q. In-Situ Fabrication of Electroactive Cu2+-Trithiocyanate Complex and Its Application for Label-Free Electrochemical Aptasensing of Thrombin. Biosensors. 2023. doi:10.3390/bios13050532
BibTeX
@article{Wang2023,
author = {Wang, Zehao and Gao, Ningning and Chen, Zhenmao and Gao, Feng and Wang, Qingxiang},
title = {In-Situ Fabrication of Electroactive Cu2+-Trithiocyanate Complex and Its Application for Label-Free Electrochemical Aptasensing of Thrombin},
journal = {Biosensors},
year = {2023},
doi = {10.3390/bios13050532}
}
EUVIMED