Novel Sensitive Electrochemical Immunosensor Development for the Selective Detection of HopQ H. pylori Bacteria Biomarker
Biosensors · 2023
DOI: 10.3390/bios13050527 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Hussamaldeen Jaradat und 4 weiteren Autor:innen. Beteiligte Einrichtung: Measurement and Sensor Technology, Chemnitz University of Technology, 09126 Chemnitz, Germany. Hauptthemen laut MEDLINE: Helicobacter pylori, Biosensing Techniques, Metal Nanoparticles. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Academic Exchange Service, DAAD (German Academic Exchange Service).
Abstract (Originalsprache)
Helicobacter pylori (H. pylori) is a highly contagious pathogenic bacterium that can cause gastrointestinal ulcers and may gradually lead to gastric cancer. H. pylori expresses the outer membrane HopQ protein at the earliest stages of infection. Therefore, HopQ is a highly reliable candidate as a biomarker for H. pylori detection in saliva samples. In this work, an H. pylori immunosensor is based on detecting HopQ as an H. pylori biomarker in saliva. The immunosensor was developed by surface modification of screen-printed carbon electrodes (SPCE) with MWCNT-COOH decorated with gold nanoparticles (AuNP) followed by HopQ capture antibody grafting on SPCE/MWCNT/AuNP surface using EDC/S-NHS chemistry. The sensor performance was investigated utilizing various methods, such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscope (SEM) coupled with energy-dispersive X-ray spectroscopy (EDX). H. pylori detection performance in spiked saliva samples was evaluated by square wave voltammetry (SWV). The sensor is suitable for HopQ detection with excellent sensitivity and linearity in the 10 pg/mL–100 ng/mL range, with a 2.0 pg/mL limit of detection (LOD) and an 8.6 pg/mL limit of quantification (LOQ). The sensor was tested in saliva at 10 ng/mL, and recovery of 107.6% was obtained by SWV. From Hill’s model, the dissociation constant Kd for HopQ/HopQ antibody interaction is estimated to be 4.60 × 10−10 mg/mL. The fabricated platform shows high selectivity, good stability, reproducibility, and cost-effectiveness for H. pylori early detection due to the proper choice of biomarker, the nanocomposite material utilization to boost the SPCE electrical performance, and the intrinsic selectivity of the antibody–antigen approach. Additionally, we provide insight into possible future aspects that researchers are recommended to focus on.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Measurement and Sensor Technology, Chemnitz University of Technology, 09126 Chemnitz, Germany.
- Department of Biomedical Engineering, Jordan University of Science and Technology, Irbid 22110, Jordan.
- SATIE Laboratory, UMR CNRS 8029, Conservatoire National des Arts et Métiers, 75003 Paris, France.
ORCID-Profile: Hussamaldeen Jaradat, Ammar Al-Hamry, Najla Fourati, Olfa Kanoun
Förderung
- German Academic Exchange Service
- DAAD (German Academic Exchange Service)
Zitieren
APA
Jaradat, H., Al-Hamry, A., Ibbini, M., Fourati, N., & Kanoun, O. (2023). Novel Sensitive Electrochemical Immunosensor Development for the Selective Detection of HopQ H. pylori Bacteria Biomarker. Biosensors. https://doi.org/10.3390/bios13050527
Vancouver
Jaradat H, Al-Hamry A, Ibbini M, Fourati N, Kanoun O. Novel Sensitive Electrochemical Immunosensor Development for the Selective Detection of HopQ H. pylori Bacteria Biomarker. Biosensors. 2023. doi:10.3390/bios13050527
BibTeX
@article{Jaradat2023,
author = {Jaradat, Hussamaldeen and Al-Hamry, Ammar and Ibbini, Mohammed and Fourati, Najla and Kanoun, Olfa},
title = {Novel Sensitive Electrochemical Immunosensor Development for the Selective Detection of HopQ H. pylori Bacteria Biomarker},
journal = {Biosensors},
year = {2023},
doi = {10.3390/bios13050527}
}
EUVIMED