Biomimetic Electrochemical Sensors Based on Core-Shell Imprinted Polymers for Targeted Sunset Yellow Estimation in Environmental Samples
Biosensors · 28.03.2023 · 13 (4) · 429
DOI: 10.3390/bios13040429 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, online erschienen am 28.03.2023. Verfasst von Sumeet Malik und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa 25120, Pakistan. Hauptthemen laut MEDLINE: Polymers, Molecular Imprinting. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Consejo Nacional de Ciencia, Tecnología e Innovación Tecnológica, National Council for Scientific and Technological Development, National University of Engineering.
Abstract (Originalsprache)
Magnetic molecularly imprinted polymers (MMIPs) contain the predesigned specialized recognition capability that can be chosen to build credible functional materials, that are easy to handle and have a good degree of specificity. Hence, the given piece of work is intended to design a novel electrochemical sensor incorporating magnetite-based molecularly imprinted polymers. The building materials consisted of a cross-linker (EGDMA), reaction-initiator (AIBN), monomer (methylene succinic acid-MSA), and template molecule (Sunset Yellow-SY dye). MMIPs exhibited a diameter of 57 nm with an irregular shape due to the presence of cavities based on SEM analysis. XRD patterns exhibited crystallinity, as well as amorphous peaks that are attributed to polymeric and non-polymeric frameworks of MMIPs. The crystallite size of the MMIPs from XRD analysis was found to be 16.28 nm based on the Debye-Scherrer’s equation. Meanwhile, the FTIR bands showed the synthesis of MMIPs using monomer and methylene succinic acid. The sorption data at the optimized operating conditions (pH 2, sorbent dosage 3 mg, time 18 min) showed the highest sorption capacity of 40 mg/g. The obtained data best fitted to the Langmuir sorption isotherm and followed the pseudo-second-order kinetics. The magneto-sensors were applied for ultrasensitive, rapid, and simple sensing of SY dye. The electrochemical experiments were run at the operating condition range of (scan rate 10–50 mV/s, tads 0–120 s, pH 5–9, potential range 1–1.5 V for CV and 1–1.3 V for SWAdASV). The linear range of detection was set to 1.51 × 10−6 M to 1.51 × 10−6 M posing LOD and LOQ values of 8.6242 × 10−5 M and 0.0002874 M, respectively. The regression analysis value for the calibration was found to be 0.950. Additionally, high adsorption efficiency, selectivity, reusability, and strong structural stability of the magneto-sensors showed potential use for SY detection in real samples. These characteristics make MMIPs a viable electrochemical substrate for the detection of chemical contaminants in the environment and in health-related products.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa 25120, Pakistan.
- Department of Chemistry, Islamia College Peshawar, Khyber Pakhtunkhwa 25120, Pakistan.
- Chemistry Institute, São Paulo State University (UNESP), Araraquara 14801-900, SP, Brazil.
- Department of Natural Sciences, Mathematics and Statistics, Federal Rural University of the Semi-Arid, Mossoró 59625-900, RN, Brazil.
- TecMARA, Faculty of Sciences, National University of Engineering, Av. Tupac Amaru 210, Rimac 15333, Lima, Peru.
ORCID-Profile: Sumeet Malik, Gul Rahman, Nauman Ali, Maria Del Pilar Taboada Sotomayor
Förderung
- Consejo Nacional de Ciencia, Tecnología e Innovación Tecnológica
- National Council for Scientific and Technological Development
- National University of Engineering
- CNPq
- DGI-VRI (National University of Engineering)
Zitieren
APA
Malik, S., Khan, A., Khan, H., Rahman, G., Ali, N., Khan, S., & Sotomayor, M. D. P. T. (2023). Biomimetic Electrochemical Sensors Based on Core-Shell Imprinted Polymers for Targeted Sunset Yellow Estimation in Environmental Samples. Biosensors, 13(4), 429. https://doi.org/10.3390/bios13040429
Vancouver
Malik S, Khan A, Khan H, Rahman G, Ali N, Khan S, et al. Biomimetic Electrochemical Sensors Based on Core-Shell Imprinted Polymers for Targeted Sunset Yellow Estimation in Environmental Samples. Biosensors. 2023;13(4):429. doi:10.3390/bios13040429
BibTeX
@article{Malik2023,
author = {Malik, Sumeet and Khan, Adnan and Khan, Hamayun and Rahman, Gul and Ali, Nauman and Khan, Sabir and Sotomayor, Maria Del Pilar Taboada},
title = {Biomimetic Electrochemical Sensors Based on Core-Shell Imprinted Polymers for Targeted Sunset Yellow Estimation in Environmental Samples},
journal = {Biosensors},
year = {2023},
volume = {13},
number = {4},
pages = {429},
doi = {10.3390/bios13040429}
}
EUVIMED