EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Coloration Time of Electrochromic Device Using Integrated WO3@PEO Electrodes for Wearable Devices

Haneul Kwon, Soohyun Kim, Mirim Ham iD, Yewon Park iD, Haekyoung Kim iD, Wonmok Lee iD, Hyunjung Lee iD

Biosensors · 2023

DOI: 10.3390/bios13020194 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Haneul Kwon und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Material Engineering, Kookmin University, Seoul 02707, Republic of Korea. Hauptthemen laut MEDLINE: Wearable Electronic Devices. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Forest Service, 2021 Yeungnam University Research Grant.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrochromic technologies that exhibit low power consumption have been spotlighted recently. In particular, with the recent increase in demand for paper-like panel displays, faster coloration time has been focused on in researching electrochromic devices. Tungsten trioxide (WO3) has been widely used as an electrochromic material that exhibits excellent electrochromic performance with high thermal and mechanical stability. However, in a solid film-type WO3 layer, the coloration time was long due to its limited surface area and long diffusion paths of lithium ions (Li-ions). In this study, we attempted to fabricate a fibrous structure of WO3@poly(ethylene oxide) (PEO) composites through electrospinning. The fibrous and porous layer showed a faster coloration time due to a short Li-ion diffusion path. Additionally, PEO in fibers supports Li-ions being quickly transported into the WO3 particles through their high ionic conductivity. The optimized WO3@PEO fibrous structure showed 61.3 cm2/C of high coloration efficiency, 1.6s fast coloration time, and good cycle stability. Lastly, the electrochromic device was successfully fabricated on fabric using gel electrolytes and a conductive knitted fabric as a substrate and showed a comparable color change through a voltage change from −2.5 V to 1.5 V.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Wearable Electronic DevicesBiological TransportDiffusionElectric ConductivityElectrodesLithium

Stichwörter der Autor:innen

electrochromic performanceion transportpoly(ethylene oxide) (PEO)tungsten trioxide (WO3)wearable devices

Substanzen

Lithium

Autor:innen und Institutionen

  • School of Advanced Material Engineering, Kookmin University, Seoul 02707, Republic of Korea.
  • School of Materials Science and Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.
  • Department of Chemistry, Sejong University, Seoul 05006, Republic of Korea.

ORCID-Profile: Mirim Ham, Yewon Park, Haekyoung Kim, Wonmok Lee, Hyunjung Lee

Förderung

  • National Research Foundation of Korea
  • Korea Forest Service
  • 2021 Yeungnam University Research Grant
  • Korean government (MSIT)
  • R&D Program for Forest Science Technology

Zitieren

APA

Kwon, H., Kim, S., Ham, M., Park, Y., Kim, H., Lee, W., & Lee, H. (2023). Enhanced Coloration Time of Electrochromic Device Using Integrated WO3@PEO Electrodes for Wearable Devices. Biosensors. https://doi.org/10.3390/bios13020194

Vancouver

Kwon H, Kim S, Ham M, Park Y, Kim H, Lee W, et al. Enhanced Coloration Time of Electrochromic Device Using Integrated WO3@PEO Electrodes for Wearable Devices. Biosensors. 2023. doi:10.3390/bios13020194

BibTeX
@article{Kwon2023,
  author = {Kwon, Haneul and Kim, Soohyun and Ham, Mirim and Park, Yewon and Kim, Haekyoung and Lee, Wonmok and Lee, Hyunjung},
  title = {Enhanced Coloration Time of Electrochromic Device Using Integrated WO3@PEO Electrodes for Wearable Devices},
  journal = {Biosensors},
  year = {2023},
  doi = {10.3390/bios13020194}
}
Kostenlos starten →