EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Skin-Inspired Tactile Sensor on Cellulose Fiber Substrates with Interfacial Microstructure for Health Monitoring and Guitar Posture Feedback

Rajat Subhra Karmakar, Chia-Pei Chu, Chia-Lin Li, Chun-Hway Hsueh iD, Ying-Chih Liao iD, Yen-Wen Lu iD

Biosensors · 2023

DOI: 10.3390/bios13020174 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Rajat Subhra Karmakar und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomechatronics Engineering, National Taiwan University, 10617 Taipei, Taiwan. Hauptthemen laut MEDLINE: Cellulose, Wearable Electronic Devices. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan (R.O.C.), National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Skin-inspired flexible tactile sensors, with interfacial microstructure, are developed on cellulose fiber substrates for subtle pressure applications. Our device is made of two cellulose fiber substrates with conductive microscale structures, which emulate the randomly distributed spinosum in between the dermis and epidermis layers of the human skin. The microstructures not only permit a higher stress concentration at the tips but also generate electrical contact points and change contact resistance between the top and bottom substrates when the pressure is applied. Meanwhile, cellulose fibers possessing viscoelastic and biocompatible properties are utilized as substrates to mimic the dermis and epidermis layers of the skin. The electrical contact resistances (ECR) are then measured to quantify the tactile information. The microstructures and the substrate properties are studied to enhance the sensors’ sensitivity. A very high sensitivity (14.4 kPa−1) and fast recovery time (approx. 2.5 ms) are achieved in the subtle pressure range (approx. 0–0.05 kPa). The device can detect subtle pressures from the human body due to breathing patterns and voice activity showing its potential for healthcare. Further, the guitar strumming and chord progression of the players with different skill levels are assessed to monitor the muscle strain during guitar playing, showing its potential for posture feedback in playing guitar or another musical instrument.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CelluloseWearable Electronic DevicesHumansFeedbackPressureTouch

Stichwörter der Autor:innen

electrical contact resistanceremote learningscreen printingskin-inspiredtactile sensorsvital sign monitoring

Substanzen

Cellulose

Autor:innen und Institutionen

  • Department of Biomechatronics Engineering, National Taiwan University, 10617 Taipei, Taiwan.
  • Department of Chemical Engineering, National Taiwan University, 10617 Taipei, Taiwan.
  • Department of Materials Science and Engineering, National Taiwan University, 10617 Taipei, Taiwan.

ORCID-Profile: Chun-Hway Hsueh, Ying-Chih Liao, Yen-Wen Lu

Förderung

  • National Science and Technology Council, Taiwan (R.O.C.)
  • National Science and Technology Council

Zitieren

APA

Karmakar, R. S., Chu, C. P., Li, C. L., Hsueh, C. H., Liao, Y. C., & Lu, Y. W. (2023). Skin-Inspired Tactile Sensor on Cellulose Fiber Substrates with Interfacial Microstructure for Health Monitoring and Guitar Posture Feedback. Biosensors. https://doi.org/10.3390/bios13020174

Vancouver

Karmakar RS, Chu CP, Li CL, Hsueh CH, Liao YC, Lu YW. Skin-Inspired Tactile Sensor on Cellulose Fiber Substrates with Interfacial Microstructure for Health Monitoring and Guitar Posture Feedback. Biosensors. 2023. doi:10.3390/bios13020174

BibTeX
@article{Karmakar2023,
  author = {Karmakar, Rajat Subhra and Chu, Chia-Pei and Li, Chia-Lin and Hsueh, Chun-Hway and Liao, Ying-Chih and Lu, Yen-Wen},
  title = {Skin-Inspired Tactile Sensor on Cellulose Fiber Substrates with Interfacial Microstructure for Health Monitoring and Guitar Posture Feedback},
  journal = {Biosensors},
  year = {2023},
  doi = {10.3390/bios13020174}
}
Kostenlos starten →