Autonomous Robot Task Execution in Flexible Manufacturing: Integrating PDDL and Behavior Trees in ARIAC 2023
Biomimetics · 10.10.2024 · 9 (10) · 612
DOI: 10.3390/biomimetics9100612 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 10.10.2024. Verfasst von Ruikai Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Robotics of China, National Program for Funded Postdoctoral Researchers, National Natural Science Foundation of China.
Abstract (Originalsprache)
The Agile Robotics for Industrial Automation Competition (ARIAC) was established to advance flexible manufacturing, aiming to increase the agility of robotic assembly systems in unstructured and dynamic industrial environments. ARIAC 2023 introduced eight agility challenges involving faulty parts, flipped parts, faulty grippers, robot malfunctions, sensor blackouts, high-priority orders, insufficient parts, and human safety. Given the unpredictability of these scenarios, it is impractical to develop a specific strategy for each possible situation. To address these issues, this paper presents a hierarchical framework for autonomous robotic task generation and execution in dynamic scenarios. The framework is divided into a task level and an execution level. Initially, an immediate task management strategy is adopted at the task level, which reasonably decomposes dynamic tasks and allocates short-term tasks to the floor robot and ceiling robot. Later, at the execution level, each robot is designed with an agent architecture that combines PDDL planning with the quick response of behavior trees. Finally, the effectiveness and practicality of the proposed framework were thoroughly validated in ARIAC 2023.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China.
- Key Laboratory of Networked Control Systems, Chinese Academy of Sciences, Shenyang 110016, China.
- Institutes for Robotics and Intelligent Manufacturing, Chinese Academy of Sciences, Shenyang 110169, China.
- University of Chinese Academy of Sciences, Beijing 100049, China.
- Institute of Future Human Habitats, Tsinghua Shenzhen International Graduate School, University Town of Shenzhen, Nanshan District, Shenzhen 518055, China.
ORCID-Profile: Ruikai Liu, Guangxi Wan
Förderung
- State Key Laboratory of Robotics of China
- National Program for Funded Postdoctoral Researchers
- National Natural Science Foundation of China
- Natural Science Foundation of Liaoning Province
Zitieren
APA
Liu, R., Wan, G., Jiang, M., Chen, H., & Zeng, P. (2024). Autonomous Robot Task Execution in Flexible Manufacturing: Integrating PDDL and Behavior Trees in ARIAC 2023. Biomimetics, 9(10), 612. https://doi.org/10.3390/biomimetics9100612
Vancouver
Liu R, Wan G, Jiang M, Chen H, Zeng P. Autonomous Robot Task Execution in Flexible Manufacturing: Integrating PDDL and Behavior Trees in ARIAC 2023. Biomimetics. 2024;9(10):612. doi:10.3390/biomimetics9100612
BibTeX
@article{Liu2024,
author = {Liu, Ruikai and Wan, Guangxi and Jiang, Maowei and Chen, Haojie and Zeng, Peng},
title = {Autonomous Robot Task Execution in Flexible Manufacturing: Integrating PDDL and Behavior Trees in ARIAC 2023},
journal = {Biomimetics},
year = {2024},
volume = {9},
number = {10},
pages = {612},
doi = {10.3390/biomimetics9100612}
}
EUVIMED