EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Snake Robot with Motion Based on Shape Memory Alloy Spring-Shaped Actuators

Ricardo Cortez, Marco Antonio Sandoval-Chileño, Norma Lozada-Castillo iD, Alberto Luviano-Juárez iD

Biomimetics · 16.03.2024 · 9 (3) · 180

DOI: 10.3390/biomimetics9030180 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 16.03.2024. Verfasst von Ricardo Cortez und 3 weiteren Autor:innen. Beteiligte Einrichtung: Unidad Profesional Interdisciplinaria en Ingeniería y Tecnologías Avanzadas, Instituto Politécnico Nacional, Mexico City 07340, Mexico. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaría de Investigación y Posgrado, Secretaría de Investigación y Posgrado IPN.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design and evaluation of a prototype snake-like robot that possesses an actuation system based on shape memory alloys (SMAs). The device is constructed based on a modular structure of links connected by two degrees of freedom links utilizing Cardan joints, where each degree of freedom is actuated by an agonist–antagonist mechanism using the SMA spring-shaped actuators to generate motion, which can be easily replaced once they reach a degradation point. The methodology for programming the spring shape into the SMA material is described in this work, as well as the instrumentation required for the monitoring and control of the actuators. A simplified design is presented to describe the way in which the motion is performed and the technical difficulties faced in manufacturing. Based on this information, the way in which the design is adapted to generate a feasible robotic system is described, and a mathematical model for the robot is developed to implement an independent joint controller. The feasibility of the implementation of the SMA actuators regarding the motion of the links is verified for the case of a joint, and the change in the shape of the snake robot is verified through the implementation of a set of tracking references based on a central pattern generator. The generated tracking results confirm the feasibility of the proposed mechanism in terms of performing snake gaits, as well as highlighting some of the drawbacks that should be considered in further studies.

Schlagwörter

Stichwörter der Autor:innen

hyper-redundant roboticsshape memory alloysnake robot

Autor:innen und Institutionen

  • Unidad Profesional Interdisciplinaria en Ingeniería y Tecnologías Avanzadas, Instituto Politécnico Nacional, Mexico City 07340, Mexico.
  • Unidad Profesional Interdisciplinaria de Energía y Movilidad, Instituto Politécnico Nacional, Mexico City 07738, Mexico.

ORCID-Profile: Norma Lozada-Castillo, Alberto Luviano-Juárez

Förderung

  • Secretaría de Investigación y Posgrado
  • Secretaría de Investigación y Posgrado IPN

Zitieren

APA

Cortez, R., Sandoval-Chileño, M. A., Lozada-Castillo, N., & Luviano-Juárez, A. (2024). Snake Robot with Motion Based on Shape Memory Alloy Spring-Shaped Actuators. Biomimetics, 9(3), 180. https://doi.org/10.3390/biomimetics9030180

Vancouver

Cortez R, Sandoval-Chileño MA, Lozada-Castillo N, Luviano-Juárez A. Snake Robot with Motion Based on Shape Memory Alloy Spring-Shaped Actuators. Biomimetics. 2024;9(3):180. doi:10.3390/biomimetics9030180

BibTeX
@article{Cortez2024,
  author = {Cortez, Ricardo and Sandoval-Chileño, Marco Antonio and Lozada-Castillo, Norma and Luviano-Juárez, Alberto},
  title = {Snake Robot with Motion Based on Shape Memory Alloy Spring-Shaped Actuators},
  journal = {Biomimetics},
  year = {2024},
  volume = {9},
  number = {3},
  pages = {180},
  doi = {10.3390/biomimetics9030180}
}
Kostenlos starten →