Development of Bioactive Scaffolds for Orthopedic Applications by Designing Additively Manufactured Titanium Porous Structures: A Critical Review
Biomimetics · 13.11.2023 · 8 (7) · 546
DOI: 10.3390/biomimetics8070546 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Biomimetics, online erschienen am 13.11.2023. Verfasst von Mikhail V Kiselevskiy und 6 weiteren Autor:innen. Beteiligte Einrichtung: N.N. Blokhin National Medical Research Center of Oncology (N.N. Blokhin NMRCO), Ministry of Health of the Russian Federation, 115478 Moscow, Russia. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 188 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.
Abstract (Originalsprache)
We overview recent findings achieved in the field of model-driven development of additively manufactured porous materials for the development of a new generation of bioactive implants for orthopedic applications. Porous structures produced from biocompatible titanium alloys using selective laser melting can present a promising material to design scaffolds with regulated mechanical properties and with the capacity to be loaded with pharmaceutical products. Adjusting pore geometry, one could control elastic modulus and strength/fatigue properties of the engineered structures to be compatible with bone tissues, thus preventing the stress shield effect when replacing a diseased bone fragment. Adsorption of medicals by internal spaces would make it possible to emit the antibiotic and anti-tumor agents into surrounding tissues. The developed internal porosity and surface roughness can provide the desired vascularization and osteointegration. We critically analyze the recent advances in the field featuring model design approaches, virtual testing of the designed structures, capabilities of additive printing of porous structures, biomedical issues of the engineered scaffolds, and so on. Special attention is paid to highlighting the actual problems in the field and the ways of their solutions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- N.N. Blokhin National Medical Research Center of Oncology (N.N. Blokhin NMRCO), Ministry of Health of the Russian Federation, 115478 Moscow, Russia.
- Department of Casting Technologies and Artistic Processing of Materials, National University of Science and Technology "MISIS", 119049 Moscow, Russia.
- Laboratory for Metals and Alloys under Extreme Impacts, Ufa University of Science and Technology, 450076 Ufa, Russia.
- Laboratory for Dynamics and Extreme Characteristics of Promising Nanostructured Materials, Saint Petersburg State University, 199034 St. Petersburg, Russia.
ORCID-Profile: Natalia Yu Anisimova, Nariman A Enikeev
Förderung
- Russian Science Foundation
Zitieren
APA
Kiselevskiy, M. V., Anisimova, N. Y., Kapustin, A. V., Ryzhkin, A. A., Kuznetsova, D. N., Polyakova, V. V., & Enikeev, N. A. (2023). Development of Bioactive Scaffolds for Orthopedic Applications by Designing Additively Manufactured Titanium Porous Structures: A Critical Review. Biomimetics, 8(7), 546. https://doi.org/10.3390/biomimetics8070546
Vancouver
Kiselevskiy MV, Anisimova NY, Kapustin AV, Ryzhkin AA, Kuznetsova DN, Polyakova VV, et al. Development of Bioactive Scaffolds for Orthopedic Applications by Designing Additively Manufactured Titanium Porous Structures: A Critical Review. Biomimetics. 2023;8(7):546. doi:10.3390/biomimetics8070546
BibTeX
@article{Kiselevskiy2023,
author = {Kiselevskiy, Mikhail V and Anisimova, Natalia Yu and Kapustin, Alexei V and Ryzhkin, Alexander A and Kuznetsova, Daria N and Polyakova, Veronika V and Enikeev, Nariman A},
title = {Development of Bioactive Scaffolds for Orthopedic Applications by Designing Additively Manufactured Titanium Porous Structures: A Critical Review},
journal = {Biomimetics},
year = {2023},
volume = {8},
number = {7},
pages = {546},
doi = {10.3390/biomimetics8070546}
}
EUVIMED