EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing Biomimetic Conductive Gelatin-Chitosan–Carbon Black Nanocomposite Hydrogels for Tissue Engineering

Kamol Dey iD, Emanuel Sandrini, Anna Gobetti, Giorgio Ramorino, Nicola Francesco Lopomo iD, Sarah Tonello iD, Emilio Sardini iD, Luciana Sartore iD

Biomimetics · 03.10.2023 · 8 (6) · 473

DOI: 10.3390/biomimetics8060473 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 03.10.2023. Verfasst von Kamol Dey und 7 weiteren Autor:innen. Beteiligte Einrichtung: Bio-Nanomaterials and Tissue Engineering Laboratory (BNTELab), Department of Applied Chemistry and Chemical Engineering, Faculty of Science, Universi…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conductive nanocomposites play a significant role in tissue engineering by providing a platform to support cell growth, tissue regeneration, and electrical stimulation. In the present study, a set of electroconductive nanocomposite hydrogels based on gelatin (G), chitosan (CH), and conductive carbon black (CB) was synthesized with the aim of developing novel biomaterials for tissue regeneration application. The incorporation of conductive carbon black (10, 15 and 20 wt.%) significantly improved electrical conductivity and enhanced mechanical properties with the increased CB content. We employed an oversimplified unidirectional freezing technique to impart anisotropic morphology with interconnected porous architecture. An investigation into whether any anisotropic morphology affects the mechanical properties of hydrogel was conducted by performing compression and cyclic compression tests in each direction parallel and perpendicular to macroporous channels. Interestingly, the nanocomposite with 10% CB produced both anisotropic morphology and mechanical properties, whereas anisotropic pore morphology diminished at higher CB concentrations (15 and 20%), imparting a denser texture. Collectively, the nanocomposite hydrogels showed great structural stability as well as good mechanical stability and reversibility. Under repeated compressive cyclic at 50% deformation, the nanocomposite hydrogels showed preconditioning, characteristic hysteresis, nonlinear elasticity, and toughness. Overall, the collective mechanical behavior resembled the mechanics of soft tissues. The electrical impedance associated with the hydrogels was studied in terms of the magnitude and phase angle in dry and wet conditions. The electrical properties of the nanocomposite hydrogels conducted in wet conditions, which is more physiologically relevant, showed a decreasing magnitude with increased CB concentrations, with a resistive-like behavior in the range 1 kHz–1 MHz and a capacitive-like behavior for frequencies 1 MHz. Overall, the impedance of the nanocomposite hydrogels decreased with increased CB concentrations. Together, these nanocomposite hydrogels are compositionally, morphologically, mechanically, and electrically similar to native ECMs of many tissues. These gelatin-chitosan–carbon black nanocomposite hydrogels show great promise for use as conducting substrates for the growth of electro-responsive cells in tissue engineering.

Schlagwörter

Stichwörter der Autor:innen

anisotropychitosanconductive carbon blackcyclic compressiondissipation energygelatinhydrogelnanocompositetissue engineering

Autor:innen und Institutionen

  • Bio-Nanomaterials and Tissue Engineering Laboratory (BNTELab), Department of Applied Chemistry and Chemical Engineering, Faculty of Science, University of Chittagong, Chittagong 4331, Bangladesh.
  • Department of Mechanical and Industrial Engineering, Materials Science and Technology Laboratory, University of Brescia, Via Branze 38, 25123 Brescia, Italy.
  • Department of Information Engineering, University of Brescia, Via Branze 38, 25123 Brescia, Italy.
  • Department of Information Engineering, University of Padova, 35131 Padua, Italy.

ORCID-Profile: Kamol Dey, Nicola Francesco Lopomo, Sarah Tonello, Emilio Sardini, Luciana Sartore

Zitieren

APA

Dey, K., Sandrini, E., Gobetti, A., Ramorino, G., Lopomo, N. F., Tonello, S., Sardini, E., & Sartore, L. (2023). Designing Biomimetic Conductive Gelatin-Chitosan–Carbon Black Nanocomposite Hydrogels for Tissue Engineering. Biomimetics, 8(6), 473. https://doi.org/10.3390/biomimetics8060473

Vancouver

Dey K, Sandrini E, Gobetti A, Ramorino G, Lopomo NF, Tonello S, et al. Designing Biomimetic Conductive Gelatin-Chitosan–Carbon Black Nanocomposite Hydrogels for Tissue Engineering. Biomimetics. 2023;8(6):473. doi:10.3390/biomimetics8060473

BibTeX
@article{Dey2023,
  author = {Dey, Kamol and Sandrini, Emanuel and Gobetti, Anna and Ramorino, Giorgio and Lopomo, Nicola Francesco and Tonello, Sarah and Sardini, Emilio and Sartore, Luciana},
  title = {Designing Biomimetic Conductive Gelatin-Chitosan–Carbon Black Nanocomposite Hydrogels for Tissue Engineering},
  journal = {Biomimetics},
  year = {2023},
  volume = {8},
  number = {6},
  pages = {473},
  doi = {10.3390/biomimetics8060473}
}
Kostenlos starten →