EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Recent Advances in the Production of Pharmaceuticals Using Selective Laser Sintering

Athinarayanan Balasankar iD, Kandasamy Anbazhakan, Velusamy Arul, Velankadu Natrayan Mutharaian, Ganesan Sriram, Kanakaraj Aruchamy iD, Tae Hwan Oh iD, Subramaniyan Ramasundaram

Biomimetics · 27.07.2023 · 8 (4) · 330

DOI: 10.3390/biomimetics8040330 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Biomimetics, online erschienen am 27.07.2023. Verfasst von Athinarayanan Balasankar und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Gobi Arts & Science College, Erode, Gobichettipalayam 638453, India. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 126 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Core Research Support Center for Natural Products.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Selective laser sintering (SLS) is an additive manufacturing process that has shown promise in the production of medical devices, including hip cups, knee trays, dental crowns, and hearing aids. SLS-based 3D-printed dosage forms have the potential to revolutionise the production of personalised drugs. The ability to manipulate the porosity of printed materials is a particularly exciting aspect of SLS. Porous tablet formulations produced by SLS can disintegrate orally within seconds, which is challenging to achieve with traditional methods. SLS also enables the creation of amorphous solid dispersions in a single step, rather than the multi-step process required with conventional methods. This review provides an overview of 3D printing, describes the operating mechanism and necessary materials for SLS, and highlights recent advances in SLS for biomedical and pharmaceutical applications. Furthermore, an in-depth comparison and contrast of various 3D printing technologies for their effectiveness in tissue engineering applications is also presented in this review.

Schlagwörter

Stichwörter der Autor:innen

3D printingbiomedicinesdrug releasepharmaceuticalsselective laser sintering

Autor:innen und Institutionen

  • Department of Physics, Gobi Arts & Science College, Erode, Gobichettipalayam 638453, India.
  • Department of Chemistry, Sri Eshwar College of Engineering (Autonomous), Coimbatore 641202, India.
  • Department of Botany, Gobi Arts & Science College, Erode, Gobichettipalayam 638453, India.
  • School of Chemical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.

ORCID-Profile: Athinarayanan Balasankar, Kanakaraj Aruchamy, Tae Hwan Oh

Förderung

  • National Research Foundation of Korea
  • Core Research Support Center for Natural Products

Zitieren

APA

Balasankar, A., Anbazhakan, K., Arul, V., Mutharaian, V. N., Sriram, G., Aruchamy, K., Oh, T. H., & Ramasundaram, S. (2023). Recent Advances in the Production of Pharmaceuticals Using Selective Laser Sintering. Biomimetics, 8(4), 330. https://doi.org/10.3390/biomimetics8040330

Vancouver

Balasankar A, Anbazhakan K, Arul V, Mutharaian VN, Sriram G, Aruchamy K, et al. Recent Advances in the Production of Pharmaceuticals Using Selective Laser Sintering. Biomimetics. 2023;8(4):330. doi:10.3390/biomimetics8040330

BibTeX
@article{Balasankar2023,
  author = {Balasankar, Athinarayanan and Anbazhakan, Kandasamy and Arul, Velusamy and Mutharaian, Velankadu Natrayan and Sriram, Ganesan and Aruchamy, Kanakaraj and Oh, Tae Hwan and Ramasundaram, Subramaniyan},
  title = {Recent Advances in the Production of Pharmaceuticals Using Selective Laser Sintering},
  journal = {Biomimetics},
  year = {2023},
  volume = {8},
  number = {4},
  pages = {330},
  doi = {10.3390/biomimetics8040330}
}
Kostenlos starten →