EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cellulose–Hemicellulose–Lignin Interaction in the Secondary Cell Wall of Coconut Endocarp

Sharmi Mazumder, Ning Zhang

Biomimetics · 04.05.2023 · 8 (2) · 188

DOI: 10.3390/biomimetics8020188 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 04.05.2023. Verfasst von Sharmi Mazumder und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Baylor University, Waco, TX 76706, USA. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The coconut shell consists of three distinct layers: the skin-like outermost exocarp, the thick fibrous mesocarp, and the hard and tough inner endocarp. In this work, we focused on the endocarp because it features a unique combination of superior properties, including low weight, high strength, high hardness, and high toughness. These properties are usually mutually exclusive in synthesized composites. The microstructures of the secondary cell wall of the endocarp at the nanoscale, in which cellulose microfibrils are surrounded by hemicellulose and lignin, were generated. All-atom molecular dynamics simulations with PCFF force field were conducted to investigate the deformation and failure mechanisms under uniaxial shear and tension. Steered molecular dynamics simulations were carried out to study the interaction between different types of polymer chains. The results demonstrated that cellulose–hemicellulose and cellulose–lignin exhibit the strongest and weakest interactions, respectively. This conclusion was further validated against the DFT calculations. Additionally, through shear simulations of sandwiched polymer models, it was found that cellulose–hemicellulose-cellulose exhibits the highest strength and toughness, while cellulose–lignin-cellulose shows the lowest strength and toughness among all tested cases. This conclusion was further confirmed by uniaxial tension simulations of sandwiched polymer models. It was revealed that hydrogen bonds formed between the polymer chains are responsible for the observed strengthening and toughening behaviors. Additionally, it was interesting to note that failure mode under tension varies with the density of amorphous polymers located between cellulose bundles. The failure mode of multilayer polymer models under tension was also investigated. The findings of this work could potentially provide guidelines for the design of coconut-inspired lightweight cellular materials.

Schlagwörter

Stichwörter der Autor:innen

cellulosecoconut endocarphemicelluloseligninnanoscale deformation mechanisms

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Baylor University, Waco, TX 76706, USA.

Förderung

  • National Science Foundation

Zitieren

APA

Mazumder, S., & Zhang, N. (2023). Cellulose–Hemicellulose–Lignin Interaction in the Secondary Cell Wall of Coconut Endocarp. Biomimetics, 8(2), 188. https://doi.org/10.3390/biomimetics8020188

Vancouver

Mazumder S, Zhang N. Cellulose–Hemicellulose–Lignin Interaction in the Secondary Cell Wall of Coconut Endocarp. Biomimetics. 2023;8(2):188. doi:10.3390/biomimetics8020188

BibTeX
@article{Mazumder2023,
  author = {Mazumder, Sharmi and Zhang, Ning},
  title = {Cellulose–Hemicellulose–Lignin Interaction in the Secondary Cell Wall of Coconut Endocarp},
  journal = {Biomimetics},
  year = {2023},
  volume = {8},
  number = {2},
  pages = {188},
  doi = {10.3390/biomimetics8020188}
}
Kostenlos starten →