Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint
Biomimetics · 14.04.2023 · 8 (2) · 156
DOI: 10.3390/biomimetics8020156 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 14.04.2023. Verfasst von Jiandong Jiang und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Agricultural Major Technology Collaborative Promotion Plan, Science Technology Department of Zhejiang Province, the Zhejiang Provincial Natural Science Foundation of China.
Abstract (Originalsprache)
To facilitate rehabilitation training for patients, we proposed the implementation of an anthropomorphic exoskeleton structure that incorporates a variable instantaneous center of rotation (ICR). This design considers the variability in knee ICR among individuals, resulting from the irregular form of the human knee joint, and leverages a double-degrees-of-freedom (2DOF) five-bar mechanism to adapt to these differences. The walking gait of the human lower limb and the corresponding knee ICR were measured and calculated using an optical 3D motion capture system. The optimal dimension parameters of the five-bar mechanism were then obtained through the optimization of human movement position inputs and rod length constraints to minimize the error in knee ICR, gait angle, and ankle trajectory between the human and the exoskeleton. Finally, we established an exoskeleton prototype to conduct relevant experimental tests. The experiment results showed that the average errors of knee ICR trajectory, hip angle, knee angle, and ankle trajectory were 5.52 × 10−4 m, 0.010 rad, 0.014 rad, and 1.57 × 10−3 m, respectively. The experimental results demonstrated that the exoskeleton’s movement trajectory was close to the human’s, reducing the human–mechanism interaction force and improving patient comfort during rehabilitation training.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China.
- Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology Ministry of Education, Zhejiang University of Technology, Hangzhou 310023, China.
ORCID-Profile: Jiyu Peng, Jiang Zhong
Förderung
- Zhejiang Agricultural Major Technology Collaborative Promotion Plan
- Science Technology Department of Zhejiang Province
- the Zhejiang Provincial Natural Science Foundation of China
- Zhejiang Provincial Natural Science Foundation of China
Zitieren
APA
Jiang, J., Chen, P., Peng, J., Qiao, X., Zhu, F., & Zhong, J. (2023). Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint. Biomimetics, 8(2), 156. https://doi.org/10.3390/biomimetics8020156
Vancouver
Jiang J, Chen P, Peng J, Qiao X, Zhu F, Zhong J. Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint. Biomimetics. 2023;8(2):156. doi:10.3390/biomimetics8020156
BibTeX
@article{Jiang2023,
author = {Jiang, Jiandong and Chen, Peisong and Peng, Jiyu and Qiao, Xin and Zhu, Fengle and Zhong, Jiang},
title = {Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint},
journal = {Biomimetics},
year = {2023},
volume = {8},
number = {2},
pages = {156},
doi = {10.3390/biomimetics8020156}
}
EUVIMED