EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Load-Capacity-Constrained Arm-Angle Planning for a Centrally Driven Humanoid Robotic Arm

Zhongyue Lu, Zhichao Zhu iD, Shanjun Chen, Tao Jiang iD, Zirong Luo iD

Biomimetics · 19.08.2026 · 11 (8) · 592

DOI: 10.3390/biomimetics11080592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 19.08.2026. Verfasst von Zhongyue Lu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Intelligence Science and Technology, National University of Defense Technology, Changsha 410073, China. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Stable Support Project of National Key Laboratory of 354 Equipment State Sensing and Smart Support, Stable Support Project of the National Key Laboratory of Equipment State Sensing and Smart Support.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a load-capacity-constrained arm-angle planning method for a centrally driven humanoid robotic arm. Joint-range and singularity constraints are projected into the one-dimensional arm-angle domain to form a geometric feasible set. A static load-capacity constraint is derived from gravity torque, the Jacobian-transpose mapping of a known endpoint load, and individual actuator-torque limits, and is projected into the same domain. Continuous arm-angle values are then selected along a prescribed Cartesian path within the intersection of the geometric and mechanical feasible sets. In a heavy-load simulation, the maximum output-power metric decreased by 13.3%, and the energy value decreased from 30.60 J to 22.95 J (25.0%). In a prototype proof-of-principle test with a 13 N payload (approximately 1.33 kg), each trajectory was executed three times; the controller-recorded shoulder peak was approximately 1.83% lower, and the recorded energy value decreased from 30.378 J to 28.85 J (5.03%). The prototype values are descriptive because run-level statistics and measurement uncertainty are unavailable, and the experiment covers only one payload and one path. The results support the proposed static, load-capacity-aware planning principle for the tested slow-motion conditions but do not establish general performance or real-time suitability.

Schlagwörter

Stichwörter der Autor:innen

arm angleenergy-efficient planninghumanoid robotic armload capacityredundancy resolution

Autor:innen und Institutionen

  • College of Intelligence Science and Technology, National University of Defense Technology, Changsha 410073, China.
  • National Key Laboratory of Equipment State Sensing and Smart Support, National University of Defense Technology, Changsha 410073, China.
  • School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China.

ORCID-Profile: Zhichao Zhu, Tao Jiang, Zirong Luo

Förderung

  • National Natural Science Foundation of China
  • Stable Support Project of National Key Laboratory of 354 Equipment State Sensing and Smart Support
  • Stable Support Project of the National Key Laboratory of Equipment State Sensing and Smart Support

Zitieren

APA

Lu, Z., Zhu, Z., Chen, S., Jiang, T., & Luo, Z. (2026). Load-Capacity-Constrained Arm-Angle Planning for a Centrally Driven Humanoid Robotic Arm. Biomimetics, 11(8), 592. https://doi.org/10.3390/biomimetics11080592

Vancouver

Lu Z, Zhu Z, Chen S, Jiang T, Luo Z. Load-Capacity-Constrained Arm-Angle Planning for a Centrally Driven Humanoid Robotic Arm. Biomimetics. 2026;11(8):592. doi:10.3390/biomimetics11080592

BibTeX
@article{Lu2026,
  author = {Lu, Zhongyue and Zhu, Zhichao and Chen, Shanjun and Jiang, Tao and Luo, Zirong},
  title = {Load-Capacity-Constrained Arm-Angle Planning for a Centrally Driven Humanoid Robotic Arm},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {8},
  pages = {592},
  doi = {10.3390/biomimetics11080592}
}
Kostenlos starten →