EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Underactuated Omnidirectional Docking Mechanism for Modular Serpentine Robots with DNA-Inspired Helical Continuum Units

Yiqi Zhang, Tuo Zhang iD, Gengbiao Chen, Lairong Yin, Amin Ye

Biomimetics · 18.07.2026 · 11 (7) · 506

DOI: 10.3390/biomimetics11070506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 18.07.2026. Verfasst von Yiqi Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Vehicle Engineering, Changsha University of Science and Technology, Changsha 410114, China. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hunan Provincial Natural Science Foundation of China, Scientific Research Fund of the Hunan Provincial Education Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bio-inspired serpentine robots show strong potential for operation in unstructured environments, yet existing systems often lack reliable modular docking, adaptive grasping, and an effective balance between structural stiffness and motion dexterity. This study proposes a Modular Omnidirectional Serpentine Robot (MOSR) that integrates a DNA-inspired tendon-driven helical continuum unit, an underactuated omnidirectional spherical docking gripper, and adaptive gripper fingers within a single module. The helical continuum unit provides two-degree-of-freedom compliant bending while improving axial stiffness through interleaved helices and a central constraint structure. The spherical docking gripper adopts a linkage-spring-slider underactuated mechanism to accommodate effective-diameter variations and support stable one-to-one and one-to-many docking. Gripper kinematics are modeled using an improved Denavit–Hartenberg method, and the workspace is verified by MATLAB simulation. Equivalent torsional and bending stiffness models are established for the helical continuum unit and validated by finite element analysis, with mean relative errors of 11.57% and 17.95%, respectively. Docking-angle analysis based on the receiver polar angle (θrec) and engager azimuth angle (θeng) shows that 61.1% of the receiver surface lies within the feasible docking region at an opening distance of 5.7 mm. A 3D-printed Polyamide 1010 prototype achieves a locomotion speed of 15.3 mm/s on grass and demonstrates terrain traversal, planar steering, obstacle crossing, adaptive grasping, and stable straight and oblique docking. These results verify the feasibility of integrating locomotion, grasping, and modular reconfiguration within a single serpentine robot module.

Schlagwörter

Stichwörter der Autor:innen

adaptive controlcontinuum robotmechanical modelingrobot dockingserpentine robotunderactuated gripper

Autor:innen und Institutionen

  • College of Mechanical and Vehicle Engineering, Changsha University of Science and Technology, Changsha 410114, China.
  • Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha 410114, China.
  • Disaster Prevention and Rescue College, Hunan Vocational Institute of Safety Technology, Changsha 410151, China.

ORCID-Profile: Tuo Zhang

Förderung

  • Hunan Provincial Natural Science Foundation of China
  • Scientific Research Fund of the Hunan Provincial Education Department

Zitieren

APA

Zhang, Y., Zhang, T., Chen, G., Yin, L., & Ye, A. (2026). An Underactuated Omnidirectional Docking Mechanism for Modular Serpentine Robots with DNA-Inspired Helical Continuum Units. Biomimetics, 11(7), 506. https://doi.org/10.3390/biomimetics11070506

Vancouver

Zhang Y, Zhang T, Chen G, Yin L, Ye A. An Underactuated Omnidirectional Docking Mechanism for Modular Serpentine Robots with DNA-Inspired Helical Continuum Units. Biomimetics. 2026;11(7):506. doi:10.3390/biomimetics11070506

BibTeX
@article{Zhang2026,
  author = {Zhang, Yiqi and Zhang, Tuo and Chen, Gengbiao and Yin, Lairong and Ye, Amin},
  title = {An Underactuated Omnidirectional Docking Mechanism for Modular Serpentine Robots with DNA-Inspired Helical Continuum Units},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {7},
  pages = {506},
  doi = {10.3390/biomimetics11070506}
}
Kostenlos starten →