Design and Experimental Verification of a Gibbon-Inspired Tree-Climbing Robot for Forestry Environments
Biomimetics · 09.05.2026 · 11 (5) · 332
DOI: 10.3390/biomimetics11050332 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 09.05.2026. Verfasst von Xinzhe Lu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Technology, Beijing Forestry University, Beijing 100083, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Programme of China, Beijing Forestry University.
Abstract (Originalsprache)
Tree-climbing robots are primarily utilized for pruning and harvesting in tall trees; however, limited structural degrees of freedom (DoFs) reduce their flexibility in complex environments. To improve the flexibility and environmental adaptability of the robots, this study proposes a novel three-armed claw-type tree-climbing robot inspired by gibbons. A 14 DoFs prototype with a total mass of approximately 2.52 kg was developed, comprising three manipulator arms and independently actuated claws. Kinematic models were separately established for the series-connected arms and the parallel-connected moving platform, with accuracy verified through numerical simulations. Based on these models, a control system was implemented, and a physical prototype was tested in field climbing experiments. Grasping tests on surfaces of varying roughness, including moist tree trunks, artificial wood, and smooth steel plates, demonstrated the adaptability of the claw to diverse materials. The robot successfully climbed trunks inclined at 52–90°, supporting a maximum payload of 1.81 kg; each full gait cycle averaged approximately 4 min. These results indicate that the robot can successfully imitate the movements of gibbons during climbing, thereby verifying the feasibility and practical application value of this bionic design in real-world forestry environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Technology, Beijing Forestry University, Beijing 100083, China.
- Key Laboratory of National Forestry and Grassland Administration on Forestry Equipment and Automation, Beijing 100083, China.
- School of Renewable Energy, Inner Mongolia University of Technology, Ordos 017010, China.
- Inner Mongolia Academician Workstation for New Energy Intelligent Equipment and Operation Maintenance, Ordos 017010, China.
ORCID-Profile: Xinzhe Lu, Jianshuo An, Latai Ga, Xiaopeng Bai, Daochun Xu, Wenbin Li
Förderung
- National Key Research and Development Programme of China
- Beijing Forestry University
Zitieren
APA
Lu, X., An, J., Ga, L., Bai, X., Xu, D., & Li, W. (2026). Design and Experimental Verification of a Gibbon-Inspired Tree-Climbing Robot for Forestry Environments. Biomimetics, 11(5), 332. https://doi.org/10.3390/biomimetics11050332
Vancouver
Lu X, An J, Ga L, Bai X, Xu D, Li W. Design and Experimental Verification of a Gibbon-Inspired Tree-Climbing Robot for Forestry Environments. Biomimetics. 2026;11(5):332. doi:10.3390/biomimetics11050332
BibTeX
@article{Lu2026,
author = {Lu, Xinzhe and An, Jianshuo and Ga, Latai and Bai, Xiaopeng and Xu, Daochun and Li, Wenbin},
title = {Design and Experimental Verification of a Gibbon-Inspired Tree-Climbing Robot for Forestry Environments},
journal = {Biomimetics},
year = {2026},
volume = {11},
number = {5},
pages = {332},
doi = {10.3390/biomimetics11050332}
}
EUVIMED