EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Generative Design of 3D-Printed Biomimetic Interlocking Blocks Inspired by the Cellular 3D Puzzle Structure of the Walnut Shell

Alexandros Efstathiadis iD, Ioanna Symeonidou iD, Konstantinos Tsongas iD, Emmanouil K Tzimtzimis, Dimitrios Tzetzis iD

Biomimetics · 21.04.2026 · 11 (4) · 289

DOI: 10.3390/biomimetics11040289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 21.04.2026. Verfasst von Alexandros Efstathiadis und 4 weiteren Autor:innen. Beteiligte Einrichtung: Digital Manufacturing and Materials Characterization Laboratory, School of Science and Technology, International Hellenic University, 57001 Thermi, G…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The goal of the present paper is to apply a novel biomimetic design strategy for the analysis, emulation, and technical evaluation of design solutions inspired by the morphogenetic logic of the walnut shell microstructure. The shell consists of specialized cells, called sclereids, which develop protrusions and mechanically interlock with neighboring cells, providing exceptional toughness through increased surface contact. To extract and transfer this biological principle, a generative algorithm was developed using the evolutionary solver Galapagos within the Grasshopper visual programming environment. The algorithm generates protrusions on the interfaces of structural blocks and optimizes their contact surface area while maintaining constant block volume. Additional design constraints, including symmetry and manufacturability considerations, were introduced to improve structural performance and computational efficiency. A series of physical specimens with variations in key geometric parameters, such as protrusion number and height, were fabricated using fused filament fabrication (FFF) with PLA material and evaluated through in-plane and out-of-plane three-point bending tests. The results show that increasing the number of protrusions significantly enhances mechanical performance, while increasing their height improves stiffness and interlocking up to a certain threshold, beyond which structural performance decreases due to stress concentration effects. This behavior can be attributed to improved load transfer and stress distribution across the enlarged interfacial area, as well as progressive mechanical engagement between complementary protrusions. The computational model is in good agreement with the experimental results, confirming the validity of the proposed approach. The study demonstrates that biomimetic optimization of interfacial geometry can enhance the mechanical behavior of interlocking systems and provides a framework for translating biological morphogenetic principles into engineering design applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingbiomimicryfinite element analysisgenerative designthree-point bendingwalnut shell

Autor:innen und Institutionen

  • Digital Manufacturing and Materials Characterization Laboratory, School of Science and Technology, International Hellenic University, 57001 Thermi, Greece.
  • Department of Architecture, University of Thessaly, 38221 Volos, Greece.
  • Department of Industrial Engineering and Management, School of Engineering, International Hellenic University, 57001 Thermi, Greece.

ORCID-Profile: Alexandros Efstathiadis, Ioanna Symeonidou, Konstantinos Tsongas, Dimitrios Tzetzis

Zitieren

APA

Efstathiadis, A., Symeonidou, I., Tsongas, K., Tzimtzimis, E. K., & Tzetzis, D. (2026). Generative Design of 3D-Printed Biomimetic Interlocking Blocks Inspired by the Cellular 3D Puzzle Structure of the Walnut Shell. Biomimetics, 11(4), 289. https://doi.org/10.3390/biomimetics11040289

Vancouver

Efstathiadis A, Symeonidou I, Tsongas K, Tzimtzimis EK, Tzetzis D. Generative Design of 3D-Printed Biomimetic Interlocking Blocks Inspired by the Cellular 3D Puzzle Structure of the Walnut Shell. Biomimetics. 2026;11(4):289. doi:10.3390/biomimetics11040289

BibTeX
@article{Efstathiadis2026,
  author = {Efstathiadis, Alexandros and Symeonidou, Ioanna and Tsongas, Konstantinos and Tzimtzimis, Emmanouil K and Tzetzis, Dimitrios},
  title = {Generative Design of 3D-Printed Biomimetic Interlocking Blocks Inspired by the Cellular 3D Puzzle Structure of the Walnut Shell},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {4},
  pages = {289},
  doi = {10.3390/biomimetics11040289}
}
Kostenlos starten →