Aerodynamic Optimization of Relay Nozzle Using a Chebyshev KAN Surrogate Model Integration and an Improved Multi-Objective Red-Billed Blue Magpie Optimizer
Biomimetics · 18.04.2026 · 11 (4) · 282
DOI: 10.3390/biomimetics11040282 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 18.04.2026. Verfasst von Min Shen und 5 weiteren Autor:innen. Beteiligte Einrichtung: Three Dimensional Textile Hubei Engineering Research Center, Wuhan Textile University, Wuhan 430200, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This project is supported by the Chinese National Science Foundation, the Shandong Province key research and development plan projects refer to major Science and Technology Innovation Engineering, the Project of Outstanding Young and Middle-aged Scientific and Technological Innovation Team in Universities of Hubei Province.
Abstract (Originalsprache)
In air jet looms, relay nozzles are critical components in governing airflow velocity and air consumption during the weft insertion process. Although computational fluid dynamics (CFD) offers high-fidelity simulation for aerodynamic analysis, its computational burden hinders its practicality in iterative aerodynamic design of relay nozzles. To address the challenge, this study proposes a data-driven framework integrating a Chebyshev polynomial Kolmogorov–Arnold Network (Chebyshev KAN) surrogate model with an Improved Multi-objective Red-billed Blue Magpie Optimizer (IMORBMO). The accuracy of the Chebyshev KAN model was benchmarked against conventional multilayer perceptrons (MLP), convolutional neural networks (CNN), and the standard Kolmogorov–Arnold Network (KAN). Experimental results demonstrate that the Chebyshev KAN model achieves the lowest mean absolute error (MAE) of 0.103 for airflow velocity and 0.115 for air consumption. Building upon the non-dominated sorting and crowding distance strategies, IMORBMO was developed, incorporating an adaptive mutation mechanism by information entropy for improvement of convergence, diversity, and uniformity of the Pareto-optimal solutions. Comprehensive evaluations on the ZDT and WFG benchmark suites confirm that the IMORBMO consistently attains the best and highly competitive performance, yielding the lowest generation distance (GD), inverted generational distance (IGD) values and the highest hypervolume (HV). Applied to the aerodynamic optimization of a relay nozzle, the proposed framework delivers an optimal aerodynamic design that increases airflow velocity by 10.5% while reducing air consumption by 15.4%, as verified by CFD simulation. The steady-state flow field was simulated by solving the Reynolds-Average NavierStokes equations with the k–ω turbulent model, utilizing Fluent 2025.R2. No-slip wall, inlet pressure and outlet pressures are boundary conditions to the relay nozzle surfaces. This work establishes a computationally efficient and accurate optimization paradigm that holds significant promise for aerodynamic design and other complex real-world engineering applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Three Dimensional Textile Hubei Engineering Research Center, Wuhan Textile University, Wuhan 430200, China.
- School of Mechanical Engineering and Automation, Wuhan Textile University, Wuhan 430200, China.
Förderung
- This project is supported by the Chinese National Science Foundation
- the Shandong Province key research and development plan projects refer to major Science and Technology Innovation Engineering
- the Project of Outstanding Young and Middle-aged Scientific and Technological Innovation Team in Universities of Hubei Province
- Hubei Key Laboratory of Digital Textile Equipment Open Subjects
- the Chinese National Science Foundation
Zitieren
APA
Shen, M., Zhang, Z., Qin, G., Zhou, D., Du, L., & Yu, L. (2026). Aerodynamic Optimization of Relay Nozzle Using a Chebyshev KAN Surrogate Model Integration and an Improved Multi-Objective Red-Billed Blue Magpie Optimizer. Biomimetics, 11(4), 282. https://doi.org/10.3390/biomimetics11040282
Vancouver
Shen M, Zhang Z, Qin G, Zhou D, Du L, Yu L. Aerodynamic Optimization of Relay Nozzle Using a Chebyshev KAN Surrogate Model Integration and an Improved Multi-Objective Red-Billed Blue Magpie Optimizer. Biomimetics. 2026;11(4):282. doi:10.3390/biomimetics11040282
BibTeX
@article{Shen2026,
author = {Shen, Min and Zhang, Ziqing and Qin, Guanxing and Zhou, Dahongnian and Du, Lizhen and Yu, Lianqing},
title = {Aerodynamic Optimization of Relay Nozzle Using a Chebyshev KAN Surrogate Model Integration and an Improved Multi-Objective Red-Billed Blue Magpie Optimizer},
journal = {Biomimetics},
year = {2026},
volume = {11},
number = {4},
pages = {282},
doi = {10.3390/biomimetics11040282}
}
EUVIMED