EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bioinspired Sternal Implant Design for Generic Anatomical Reconstruction: An In Silico Framework for Material Selection and Biomechanical Validation

Işıl Kutbay iD, Zeynep Gerdan iD, Murat Çolak iD, Yasemin Tabak iD, Abdullah Tahir Şensoy iD

Biomimetics · 05.04.2026 · 11 (4) · 251

DOI: 10.3390/biomimetics11040251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 05.04.2026. Verfasst von Işıl Kutbay und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronics and Automation, University of Health Sciences, Uskudar, 34668 Istanbul, Türkiye. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Delft University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The sternum protects the intrathoracic organs and contributes to chest wall mechanics, which makes reconstruction after tumor resection, trauma, or infection a demanding biomechanical problem. This study presents an in silico workflow for preselecting materials for sternal implants before physical prototyping. After a virtual resection, an anatomically conformal implant was designed and candidate biomaterials were screened in CES Selector using density, elastic modulus, fatigue strength, fracture toughness, toxicity, medical grade suitability, and MRI safety. A representative subset of the screened candidates was then compared by finite element modeling in terms of stress transfer and deformation. Seventeen candidates met the screening criteria. Ti-13Nb-13Zr showed an elastic modulus of about 80 GPa, and the titanium-based candidates showed deformation values of about 0.96 to 1.03 mm, whereas GF PEEK reached about 1.74 mm. The stress shielding index also showed that titanium-based materials remained on the implant-dominant side, while polymer-based materials shifted stress transfer toward bone. Taken together, the findings suggest that Ti-13Nb-13Zr offers the best overall balance for load-bearing sternal reconstruction, whereas PEEK-based systems may be more suitable within the present model for hybrid or adjunct designs. The proposed workflow can support early implant planning and guide future experimental and clinical studies.

Schlagwörter

Stichwörter der Autor:innen

CES selectorbioinspired designbiomaterial selectionfinite element analysissternum implantthoracic reconstruction

Autor:innen und Institutionen

  • Department of Electronics and Automation, University of Health Sciences, Uskudar, 34668 Istanbul, Türkiye.
  • Vocational School of Technical Sciences, Department of Digital Health Systems Technician, Bayburt University, 69000 Bayburt, Türkiye.
  • Vocational School of Technical Sciences, Department of Electronic Automation, Bayburt University, 69000 Bayburt, Türkiye.
  • TÜBİTAK National Metrology Institute (UME), 41470 Gebze, Türkiye.
  • Faculty of Mechanical Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands.
  • Department of Oral and Maxillofacial Surgery, Erasmus University Medical Center, Doctor Molewaterplein 40, 3015 GE Rotterdam, The Netherlands.

ORCID-Profile: Işıl Kutbay, Zeynep Gerdan, Murat Çolak, Yasemin Tabak, Abdullah Tahir Şensoy

Förderung

  • Delft University of Technology

Zitieren

APA

Kutbay, I., Gerdan, Z., Çolak, M., Tabak, Y., & Şensoy, A. T. (2026). Bioinspired Sternal Implant Design for Generic Anatomical Reconstruction: An In Silico Framework for Material Selection and Biomechanical Validation. Biomimetics, 11(4), 251. https://doi.org/10.3390/biomimetics11040251

Vancouver

Kutbay I, Gerdan Z, Çolak M, Tabak Y, Şensoy AT. Bioinspired Sternal Implant Design for Generic Anatomical Reconstruction: An In Silico Framework for Material Selection and Biomechanical Validation. Biomimetics. 2026;11(4):251. doi:10.3390/biomimetics11040251

BibTeX
@article{Kutbay2026,
  author = {Kutbay, Işıl and Gerdan, Zeynep and Çolak, Murat and Tabak, Yasemin and Şensoy, Abdullah Tahir},
  title = {Bioinspired Sternal Implant Design for Generic Anatomical Reconstruction: An In Silico Framework for Material Selection and Biomechanical Validation},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {4},
  pages = {251},
  doi = {10.3390/biomimetics11040251}
}
Kostenlos starten →